Number Ranges Of Faults And Alarms - Siemens G130 List Manual

4.1.3

Number ranges of faults and alarms

Note
The following number ranges represent an overview of all faults and alarms used in the
SINAMICS drive family.
The faults and alarms for the product described in this List Manual are described in detail in
"List of faults and alarms" (Page 1369).
Faults and alarms are organized into the following number ranges:
Table 4-5
SINAMICS G130/G150
List Manual (LH2), 07/2016, A5E03263479A
Number ranges of faults and alarms
of To
1000 3999
4000 4999
5000 5999
6000 6899
6900 6999
7000 7999
8000 8999
9000 12999
13000 13020
13021 13099
13100 13102
13103 19999
20000 29999
30000 30999
31000 31999
32000 32999
33000 33999
34000 34999
35000 35199
35200 35999
36000 36999
37000 37999
Control Unit
Reserved
Power section
Infeed
Braking Module
Drive
Option Board
Reserved
Licensing
Reserved
Know-how protection
Reserved
OEM
DRIVE-CLiQ component power unit
DRIVE-CLiQ component encoder 1
DRIVE-CLiQ component encoder 2
Note
Faults that occur are automatically output as an alarm if the encoder is
parameterized as a direct measuring system and does not intervene in
the motor control.
DRIVE-CLiQ component encoder 3
Note
Faults that occur are automatically output as an alarm if the encoder is
parameterized as a direct measuring system and does not intervene in
the motor control.
Voltage Sensing Module (VSM)
Terminal Module 54F (TM54F)
Terminal Module 31 (TM31)
DRIVE-CLiQ Hub Module
HF Damping Module
4 Faults and alarms
4.1 Overview of faults and alarms
Area
1367