Raid Configuration; For Windows Server 2012 R2 - Hitachi FLASHMAX2 User Manual

RAID Configuration

This section describes how to use the SoftRAID function of the OS to configure
RAID and perform replacement when a fault occurs
SoftRAID supports RAID0 (striping), but not RAID1 (mirror) and RAID5.

For Windows Server 2012 R2

[RAID0 (striping) configuration procedure]
1. Check the vgcx of the Flash Drive assigned to a striped volume
(1) Click the Search icon which may be located at the top or bottom right of
the screen.
(2) Enter FlashMAX to search and then click FlashMAX III Manager.
Driver and Utility
PCIe Flash Drive FlashMAX2&3 User's Guide
3-25