Nokia 7368 Product Manual page 131
Intelligent services access
manager cpe
Hide thumbs
Also See for 7368:
- Product manual (176 pages) ,
- Product manual (170 pages) ,
- Product manual (162 pages)
Table of Contents
Advertisement
7368 ISAM CPE A-240Z-A Product Guide
8.3 IOT application software package download
Procedure 54
Issue: 01
2
Configure the Smart Home maintenance.
3
STOP. This procedure is complete.
The A-240Z-A CPE supports IOT. This section describes how to download the IOT
application software package from the Auto Configuration Server (ACS) to the CPE
and to activate the software.
The filename for the IOT application software package is 3FE46043XXXXXX. The
software image file should be placed on the HTTP server accessible by the CPE.
The format of the URL for downloading the IOT application software package should
be "http://<IP_address>/3FE46043<build_version>, for example:
http://192.168.5.142/3FE46043FFEB38
Downloading the IOT application software package
1
Log into the ACS with your username and password.
2
Select the Download RPC method for upgrading the CPE.
3
Provide the HTTP URL and file size to be downloaded.
4
Initiate the download process.
5
Verify that the software package has been downloaded successfully:
a
On the ACS, execute the GetParameterValue command on the CPE
object:InternetGatewayDevice.X_ALU-COM_SmartHome.lotFirmwareInfo.1.FileName
b
On the ACS, execute the GetParameterValue command on the CPE object:
InternetGatewayDevice.X_ALU-COM_SmartHome.lotFirmwareInfo.1.IOTDownloadSt
atus
The status should be DownloadSuccess.
If the status is DownloadFailure, repeat the procedure.
c
On the ACS, execute the SetParameterValue command on the CPE object:
InternetGatewayDevice.X_ALU-COM_SmartHome.IotGWCtrl.Enable
3FE-46615-AAAA-TCZZA
Configure an A-240Z-A CPE
129
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
