Installing/Removing Power Supply Modules - Siemens RUGGEDCOM RX5000 Installation Manual

Chapter 3
Modules
Figure 15: Installing a Module
1. Chassis 2. Module 3. Screw
5. Tighten the screws to secure the module.
6. [Optional] If necessary, install the device in the rack.
7. Connect power to the device.
Section 3.3

Installing/Removing Power Supply Modules

The RUGGEDCOM RX5000 supports dual redundant AC and/or DC power supplies that can be installed in any
combination.
Figure 16: Power Supply Modules
1. Power Supply Module (PS1) 2. Power Supply Module (PS2)
24
1
2
3
1 2 3 4 5 6
Installing/Removing Power Supply Modules
RUGGEDCOM RX5000
Installation Guide
7 8