Sanyo CP14SE1 Instruction Manual page 8

Private Position / On Scr
Private Position / On Scr
Private Position
Cancelling of the Private Position
1
Select private position (position "15").
2
Press and hold the RECALL/COLOUR SYSTEM
button for more than 2 seconds.
3
Press the MENU button.
The private position is now cancelled.
On Screen Display Language
1
Press the MENU button for MAIN menu display.
2
Select "LANGUAGE " by pressing the Programme
UP or DOWN button.
3
Press the VOLUME + or - button for Language
menu display.
Connecting other Equipment
Connecting to the Rear AV1 Input Jacks
Connecting to a Monophonic Video Recorder (AV1)
INPUT
AV1/DVD
C
R
To Audio Input-R (AV1)
(MONO)
C
B
To Audio Input-L (AV1)
Y
To Video Input (AV1)
VIDEO
Video/DVD Player
When a stereo video recorder is connected to the TV
set, make sure the audio output terminals are correctly
connected to the corresponding L (left) and R (right)
audio input terminals.
When a monophonic video recorder is connected to this
product, connect the audio output terminal of the video
recorder to the L(left) audio input terminal of the TV set.
8
een Display Language / Connecting other Equipment
een Display Language /
15
Note: For monau-
MONITOR OUT
ral model TV there
is no L/R audio
input terminals. If
R R
the video player is
stereo, connect
L L
the Left (L) audio
output terminal
V
from video player
I
D
E
to audio input ter-
O
minal on the mon-
aural TV set (more
details see your
video player man-
ual book).
To View a Programme on Private Position
1
Select private position (In this case position "15").
2
Press and hold the RECALL/COLOUR SYSTEM
button for more than 2 seconds.
3
Press the
RECALL/COLOUR
button for watching a TV programme.
Note: The position "15" is still in the private position.
Select "ENGLISH", "
y C
P C N N
" ", "FRANÇAIS", "INDONESIA" by press-
ing the Programme UP or DOWN button. To return to
the normal TV mode, press the MENU button.
4
Press the MENU button to return to normal TV
display.
To make sure the colour system of the TV set is
consistent with the signal of your video recorder, if
necessary, select a matching system. The colour
system set in AV mode can be stored automatically.
When an AV program (from a video recorder or a
DVD player) is played, you may return to TV mode by
selecting any of the TV position.
To watch video input picture, select AV1 position (AV
position for monaural models) by pressing the TV/AV
Selector.
When the stereo signal is inputted from the right and left
audio input terminals, each time the SURROUND button
is pressed (or selection of On-screen Menu), surround
mode is changed as follows; " SURROUND ON" and
"SURROUND OFF".
Note for monaural models: the surround button is no
function.
Note: The effect of surround is not obtained although the
switching of surround is displayed in this monaural con-
nection.
When the audio signal from the VCR is stereo, be sure to
connect the right and left channels to the respective right
and left AUDIO IN terminals. Then select "STEREO"
channel of the audio channel in the TV set with the
A B
remote control button.
Note for monaural models: the Stereo/Mono button is
no function.
15
SYSTEM
", "VIETNAMESE",