Optional Parts; Functions And Dimensions; Selecting The Installation Location; Installing The Receiver Unit - Fujitsu UTY-LRHYM Installation Manual

3. OPTIONAL PARTS

Name and Shape Q'ty
Receiver unit wire C
10m

4. FUNCTIONS AND DIMENSIONS

90
Dimensions
11.5
18.5
Application Part No.
For extending
1 the receiver 9707598025
unit wire
OPERATION indicator
lamp (GREEN)
TIMER indicator
lamp (ORANGE)
ECONOMY indicator
lamp (GREEN)
MANUAL AUTO button
REMOTE CONTROL
SIGNAL RECEIVER
84.6
71.8
57.4
17
Unit: mm

5. SELECTING THE INSTALLATION LOCATION

Consult the customer and determine the installation location according to the
following:
(1) The receiver unit cable can be extended up to 10m. (To extend the
wiring, purchase the optional receiver unit wire C.)
(2) The signal reception angle of the receiver unit is shown in the figures
below.
(3) Do not install the receiver unit near a fluorescent light. (The unit must be
at least 1m away from a light source.)
(4) Do not install the receiver unit where it will be exposed to direct sunlight.
(5) Do not install the receiver unit where it will be exposed directly to the
airflow from the indoor unit.
Indoor unit
Ceiling
Signal reception
angle
Remote
controller
Indoor unit
Max. 10m
Ceiling
Remote
controller
Signal reception angle

6. INSTALLING THE RECEIVER UNIT

• Do not touch the PCB or PCB parts of receiver unit directly with your
hands.
• Fixing of the holder cover with the screws in the standard parts may be
unsuitable if the wall or ceiling material is weak. If so, prepare screws
suitable for the wall or ceiling material, and fix it.
Max. 10m
5m
Receiver
unit
Receiver unit
120°
5m
CAUTION
En-2