Remote Temperature Sensor - LG ARNH08GK3A2 Installation Manual

Remote Temperature Sensor

Remote temperature sensor can be installed any place a user wants to detect the temperature.
How to Install Remote Temperature Sensor
Step 1. After deciding where the remote temperature sensor is in-
stalled, decide the location and height of the fixing screws.
(Interval between the screws : 60mm)
Step 2. Insert the connector of the connection wire into the space
for the connector in place of the room temperature sen-
sor.(CN_ROOM)
Step 3. Separately, set the option code of the attached controller
on the indoor unit.
In detail, refer to "installer setting mode".
Step 4. The Connection wire does not matter if you change the color of the wire because of non-
polar.
Step 5. Integrate the remote temperature sensor with the screws as the order of arrows.
CAUTION
1. Choose the place where the average temperature can be measured for the indoor unit oper-
ates.
2. Avoid direct sunlight.
3. Choose the place where the heating devices do not affect the remote sensor.
4. Choose the place where the outlet of the cooling fan do not affect the remote sensor.
5. Choose the place where the remote sensor isn't affected when door is open.
Fixing the
Remote Sensor
1
2
Hydro Kit Installation Manual 29
Accessories Installation
Fixing screws 60mm