Operating The Touch Operation Panel - Hitachi EP-M70E Instruction Manual

Operating the Touch Operation Panel

The air purifying feature works in all operation modes.
The touch operation panel is made of glass.
If the touch operation panel display disappears, touch
The touch operation panel display will disappear when
The upper part of the touch operation panel is the display section and the lower part is the control section.
Use the touch operation panel to switch settings.
Temperature/
Humidity Monitor
Filter Cleaning
Water Refill
Display Switch
Switches the display between temperature /
humidity monitor.
Switches the display of the touch
operation panel. (Long-press for about 3
seconds)
Touch this button first when the
display or operation panel is off.
When tapped again, it turns off the
display or operation panel.
Lock
(Long-press MENU for about 3 seconds)
Use this to prevent incorrect
operation.
Note
The glass touch may have a different reaction depending on the sur-
rounding temperature and humidity, physical condition of the user, and
the condition of the electronic appliances near by the unit.
If it does not respond after touching, release and try again.
If the interval between touches is short, the unit may respond incorrectly.
The sensitivity will not change by the force applied when touching.
There may be no response if the operation panel is wet or dirty.
Wipe off with a dry cloth to use.
The display may be difficult to view if the unit is placed in brightly lit
places such as near a window with direct sun light.
E-6
EP-M70E_EN.indd 6 EP-M70E_EN.indd 6
Notification Display
Displays the room temperature and humidity while operating.
This should be taken as a guide only.
Displays notification contents that came out while operating.
Example: ,
Lights up when it is time to clean the humidifying filter. This notification (guide) is
made based on the operation time.
unplug the power cord to reset and turn off the indicator.)
The indicator lights up when the water in the water tank is nearly empty.
The indicator lights up when the child lock is set.
The indicator lights up when the unit is operating on timer.
The indicator lights up when the unit is operating with PM2.5 sensing.
The indicator lights up when the unit is operating on humidify mode or skin
moisturize mode.
(P.E-24)
(P.E-20)
MENU
(P.E-25)
to display it again.
is touched again.
(P.E-26)
(P.E-39)
(P.E-28 - E-31) (After the indicator lights up,
(P.E-21)
(P.E-31, 32)
(P.E-25)
(P.E-24)
(P.E-24)
2017/2/23 17:27:40 2017/2/23 17:27:40