Selecting Operation Mode (Basic Operations; Switching Airfl Ow Rate - Hitachi EP-M70E Instruction Manual

Selecting Operation Mode (Basic Operations)

 There are three operation modes to choose from. Use these modes according to your preference.
 The fan will not stop while the unit is operating in all operation modes.
(The fan may stop if the unit is set to eco saving operation mode.
 The air purifying feature works in all operation modes.
 Switching the operation mode will set the airfl ow to "Auto".
Operation Mode Patterns and Tips for Selection
Operation Mode
This operation mode is fit for normal use.
Skin Moist
Humidify · Odor and dust sensors will detect the level of room air contamination.
Air Purify
Afterwards, the unit will switch the airflow rate automatically.
· During "Auto" operation, the unit operates from silent to high airflow.
Mode
· The humidifying operation is not performed.
Skin Moist
Humidify
Controls the room humidity to about 50%.
Air Purify
· During "Auto" operation, the unit operates from silent to high airflow.
Mode
Skin Moist
Humidify
Increases room humidity and controls it to about 60%.
Air Purify
· During "Auto" operation, the unit operates from silent to high airflow.
Mode
Touch
Each touch changes the operation mode.
Switching Airfl ow Rate
 Each time Air
flow
Operation Mode
Air Purify
Humidifying
Skin Moist
EP-M70E_EN.indd 21 EP-M70E_EN.indd 21
Operation Pattern and Selection
Mode
button is pressed while the unit is operating, the mode switches in the following order.
Auto Max "Silent"
(P.E-23))
The indicator of the selected mode will light up.
Indicator
Each press of the button changes the mode.
Air Purify Humidifying
Changing the operation mode will set the airflow to "Auto."
Airflow
"Medium"
Flap Direction
Upward
Diagonal
Diagonal
Skin Moist
...
"High" Auto
E-21
2017/2/23 17:27:43 2017/2/23 17:27:43