Selecting Auto Mode; Switching Airfl Ow Rate - Hitachi EP-A3000 Instruction Manual

3 Auto modes are available for your choice.
The fan will not stop during operation in the Auto Mode.
Auto Modes and Tips for Selection
Mode
This is a normal operation mode.
Air Purify
The odor sensor detects the degree of air contamination, and airflow rate is switched automatically.
This mode is recommended when you have concerns about room odor.
Odor
The odor sensor detects the degree of air contamination and switches to "MAX" operation quicker than when
the unit operates in the "Air Purify" mode.
This mode is recommended when you have concerns about pollen contamination.
The operation with Medium airflow is continued for 20 minutes. Then, the odor sensor detects the degree of air
Pollen
contamination and automatic operation (at "Silent" or "Med" airflow rate) is continued for another 20 minutes.
After that, these operations are repeated.
The airflow indicators automatically switch and light while the unit runs in the Auto Mode, but when
Note
the air in the room is clean, the last lit airflow indicator goes out. In this case, the fan is still rotating to
detect the degree of air contamination.
You can select a desired airflow rate from the three different levels.
EP-A3000.indd 9
Selecting Auto Mode (Basics)
Press button.
Operation mode switches
every time you press this
button.
Switching Airflow Rate
Press button.
Airflow rate switches every
time you press this button.
Tips for Selection
The selected mode indicator lights up (green).
Lit
Operation mode switches every time you
press Mode button.
Air Purify
The indicator of the set airflow rate lights up.
Lit
Airflow rate changes in the following sequence.
(Silent)
Green
Odor Pollen
(Medium) (Max)
Green Green
11/18/2011 8:40:41 AM
E-9