Bosch GWH-635-ES User Manual page 7

control (Fig. 7, pos. 3) pressed for 3
seconds.
Fig. 7 Memorising water
temperature
B Only one temperature can be
memorized using the "Program"
button on the remote control.
B At this point the remote control will
display the memorized temperature .
When the hot water tap is turned on,
the water heater will supply hot
water at the temperature memorized
on the remote control.
Apart
i
temperature that can be
memorized
"Program" button on the
control panel, a second
temperature
memorized
remote control using the
"Program"
meet the needs of each
user.
6 720 606 990
from the
using the
can be
on each
button, to
Using the Remote Control
If the temperature was memorized
using remote control buttons (it is
possible to combine up to six remote
controls), it can only be modified whilst
hot water is flowing if the same remote
control is used again (see chapter 4.6
"Priority Function").
Using the
(operation
temperature)
To operate the equipment with a
previously memorized temperature:
B Press the "Program" button on the
remote control.
The remote control display or control
panel will now show the previously
memorized temperature. When the hot
water tap is turned on, the water heater
will supply hot water after a few
seconds, at
temperature.
"Program" button
with memorized
the memorized
7