Get Started; Charge The Battery - Philips SHB4385 User Manual

3 Get started

Charge the battery

Note
•
Before you use your headset for the first time,
place the headsets in the charging case and
charge the battery for 3 hours for optimum
battery capacity and lifetime.
•
Use only the original USB charging cable to
avoid any damage.
•
Finish your call before charging the headset,
as connecting the headset for charging will
power the headset off.
Charging case
Connect one end of the USB cable into
the charging case, and another end into
the power source.
» The charging case starts charging.
• Charging process is verified by the
white LED light next to the USB
socket on the case..
• When the charging case is fully
charged, the white light goes off.
Tip
•
The charging case serves as a portable backup
battery for charging the headset. When the
charging case is fully charged, it supports one
full recharge cycle for the headset.
Headset
Place the headset in the charging case.
» The headset start charging.
• Charging process is verified by white
LED lights on the earpieces.
• When the headset is fully charged,
the white light goes off.
Tip
•
Normally, a full charge takes 2 hours (for the
headset or charging case).
EN
5