Table of Contents
Advertisement
3 Get started
Charge the battery
Note
•
Before you use your headset/charging case for
the first time, charge the battery for 5 hours for
optimum battery capacity and lifetime.
•
Use only the original USB charging cable to
avoid any damage.
•
Finish your call before charging the headset,
as connecting the headset for charging will
power the headset off.
Charging case
Connect one end of the USB cable into
the charging case, and another end into
the power source.
» The charging case starts charging.
•
When the charging case is charging,
a white LED light will be displayed.
•
When the charging case is fully
charged, the white light goes off.
Headset
Place the headset on the charging case.
» The headset start charging.
•
When the headset is charging, a
white LED light will be displayed.
•
When the headset is fully charged,
the white light goes off.
Tip
•
Normally, a full charge takes 2 hours (for the
headset or charging case).
Pair between both sides
of the headset
1
Make sure that the headset is fully
charged.
2
Press and hold the multi-function
buttons on both sides of the
headset for 2 seconds.
» The white LED lights on both
side of the headset flash 3 times.
» Both sides of the headset are
connected automatically.
» The headset is ready to pair with
the Bluetooth device.
EN
5
Advertisement
Table of Contents
