Relocation By Special Dial - Toshiba Strata CT System Administrator Manual

Station Relocation

Relocation by Special Dial

This option enables two station numbers and their features to be exchanged with or without physically
relocating the telephones. The exchange takes place through the use of special dial codes. For the
procedure below, we are using Station A/B and Location 1/2 to demonstrate the exchange.
➤
To turn on the Special Dial Station Relocation feature
1. From the Administrator
station, press a [DN] +
to turn on the Special Dial
Station Relocation feature
2. Press
H
➤
To relocate (swap) Station A and B
1. From Station A, press a [DN]
#627NNN
+
C
of Station B).
2. From Administrator station,
press a [DN] +
off Special Dial Station
Relocation, then press
12
#6283
Spkr
.
NNN
( = [DN]
#6281
to turn
Spkr
.
You hear confirmation tone indicating that the Station
Relocation feature is on. If you hear a busy tone, the Station
Relocation feature was already turned on, or you did not dial
from the Administrator station.
You hear confirmation tone. Station A now has the buttons
and features of Station B and vice versa.
After Station Relocation is turned off, you hear a confirmation
tone. If you hear a busy tone, Station Relocation was already
turned off, or you did not dial from the Administrator station.
Note After the relocation is completed, exchange the
keystrips of the two telephones, if they are different,
because a 10-button telephone replaced with a
20-button type telephone, retains the 10-button
assignments.
Strata CT System Administrator Guide October 2000
Setting System Parameters