Equipment Notes
Equipment Notes
o
Most of the operations in this guide require a Liquid Crystal Display (LCD) digital telephone at
the System Administrator's work station.
Typically, use the station with [PDN] 10, 100, or 200 to perform the functions in this guide. This
o
guide assumes the Adminstrator's telephone is connected to station Port 000. If you wish, you can
use a different [PDN] which must be assigned by the system installer. In any case, the station is
referred to as the "Administrator station" throughout this guide. Ask your system installer which
station this is.
Organisation
This guide is divided as follows:
H
o
Chapter 1 – Setting System Parameters
System Administrator-specific parameters. These parameters are given in alphabetical order.
o
Appendix A – Access Codes
SD buttons for one-touch feature access.
C
o
Appendix B – Directories/Record
Numbers and Speed Dial memos, and telephone locations and instructions for displaying [DN],
physical port, and logical port information.
Notes to Users
o
iv
provides feature access code sequences which can be stored onto
provides blank directories for recording User Names/
contains an overview of Safety Approval and EMC Compliance details.
contains descriptions and procedures for changing
Strata CT System Administrator Guide October 2000
Introduction