Table of Contents
Advertisement
WIT-300H Installation Manual
Issue: 0.1C
In " System ID & Number Plans >> System & Device IP Address Plan " , you can see a WIT3012D
type. It indicates that WIT-300H phone is registered into the iPECS LIK-300.
3.2
WIT-300H Registration
WIT-300H is recognized as one of the wired phone by iPECS MFIM. The registration can be completed
by two modes like the LIP phone; Remote mode and Local mode. If you could use the MFIM located in
your local LAN area, you can register your phone in local mode, otherwise, you should use remote mode.
3.2.1
Remote mode
To register WIT-300H in remote mode, you should know WIT-300H MAC address and IP.
A. Basic settings
(1) Enter the MAC address of WIT-300H in MFIM web administration page.
MAC address is found at menu "
Address ".
(2) Enter SSID for wireless networking at "
Config> SSID". User can probe all the APs around the WIT-300H, and choose one of
them at "Auto" menu shown here.
This Document Contains proprietary information and may not be reproduced or copied without express
Written permission of a duly authorized representative of LG Electronics company
(MENU) > Phone Info > Network Info > MAC
(MENU) > Settings > Network > 802.1b
19
Date:: 30/Jan/05
Advertisement
Table of Contents
