Settings; Overview - Settings; Settings - Handset, Ringer, Etc - Siemens 2000C pocket Operating Instructions Manual

Main menu – functions
Prerequisite:


You have selected a specific base as described above and
. The display shows:
have called up the submenu
*  % 3
) 4 % 
  
6666666666666666
To activate, press the display


key .
43

Settings

Overview – settings
Setting Explanation/notes
Handset Call volume;
Volume Level 1 is not shown in the
display!
Ringer Volume and tone
Options (call signal, bell)
– volume Low to high or
ringer off
– tone Set tone frequency
Register see page 16
Base see page 46
Settings
Handset see page 48
Settings
Note:



Before it is saved, each setting can be cancelled using
or and you can return to the higher-level

display.
On-hook key for terminating/cancelling functions
and returning to the "on" status immediately.
44
Settings


Settings – handset, ringer, etc.

Level Default



3 1
  5 "#

   
 
  
6 6
   
0

10 2


– –
Example: Setting the ringer volume

– –


– –


   

1  5 "#

  7% ! 
 
 

See page 59 for information on acoustic signals.
Press the menu key.
  
Scroll to
and confirm.
For an explanation of the individual
settings, see the section entitled
"Overview – settings", page 44.
Press the menu key.
  
Scroll to
and confirm.
   
Scroll to
and confirm.
Confirm the ringer volume – the ringer
volume audible is specific to the cur-
rent setting (default: level 6), see the
display.
Symbol for ringer
Dark bars indicate the current

setting – level 3 in this case
Confirm current setting

(save)
Change the setting
Press the display keys to set the
required volume and confirm.
45