Host-Aging-Time (Igmp-Snooping View); Host-Tracking (Igmp-Snooping View) - HP 3600 v2 Series Command Reference Manual

[Sysname] igmp-snooping
[Sysname-igmp-snooping] group-policy 2000 vlan 2

host-aging-time (IGMP-snooping view)

Syntax
host-aging-time interval
undo host-aging-time
View
IGMP-snooping view
Default level
2: System level
Parameters
interval: Specifies an aging timer in seconds for dynamic member ports. The value ranges from 200 to
1000.
Description
Use host-aging-time to configure the aging timer for dynamic member ports globally.
Use undo host-aging-time to restore the default.
By default, the aging timer of a dynamic member port is 260 seconds.
This command takes effect only in IGMP snooping-enabled VLANs.
Related commands: igmp-snooping host-aging-time.
Examples
# Set the aging timer for dynamic member ports to 300 seconds globally.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] host-aging-time 300

host-tracking (IGMP-snooping view)

Syntax
host-tracking
undo host-tracking
View
IGMP-snooping view
Default level
2: System level
Parameters
None
10