Control Panel Parts And Functions - Canon imageRUNNER ADVANCE C5051 Getting Started

Control Panel Parts and Functions

20
19
1
①
Control Panel Power Switch (Sub Power Supply)
Press to set or cancel the Sleep mode.
②
USB Port
Use to connect memory media to the machine via USB.
③
Settings/Registration key
Press to specify settings/registration.
④
Counter Check key
Press to display the copy and print count totals on the touch panel display.
⑤
Clear key
Press to clear entered values or characters.
⑥
Stop key
Press to stop a job in progress, such as a scan, copy, or fax (scanning only)
job.
⑦
Edit Pen
Use when operating the touch panel display, such as to enter characters. If
you lose the edit pen, contact your local authorized Canon dealer. Do not
use an object with a sharp end on the control panel, such as a pencil or
ballpoint pen, in place of the edit pen.
⑧
Start key
Press to start an operation.
⑨
Main Power Indicator
Lights when the main power is turned ON.
⑩
Error Indicator
Flashes or lights if there is an error in the machine. When the Error
indicator flashes, follow the instructions that appear on the touch panel
display. When the Error indicator maintains a steady red light, contact your
local authorized Canon dealer.
1-10
Parts and Their Functions
18 17 16 15 14 13 12 11
⑪
Processing/Data Indicator
Flashes or blinks green when the machine is performing operations, and
maintains a steady green light when fax data is stored in memory.
⑫
Reset key
Press to restore the standard settings of the machine.
⑬
ID (Log In/Out) key
Press to log in/out when a login service such as Department ID
Management or SSO-H has been set.
⑭
Numeric keys
Press to enter numerical values.
⑮
Touch Panel Display
The settings screen for each function is shown on this display. Eight
function keys are displayed by default.
⑯
Brightness Adjustment Dial
Use to adjust the brightness of the touch panel display.
⑰
Volume Settings Key
Press to display the screen for adjusting settings such as the transmission
volume and fax sending/receiving alarm volume.
⑱
Status Monitor/Cancel key
Press to check the status of jobs or to cancel print jobs. Also, press to check
status of the machine, such as checking the amount of paper remaining.
⑲
Quick Menu key
Press to retrieve favorite functions stored in Quick Menu. Also, if you are
using authentication, Quick Menu set for each individual user can be
displayed. (See e-manual > Quick Menu.)
⑳
Main Menu key
Press to return to the Main Menu screen such as when you want to switch
functions.
1 2
3
4
5
6
10 9 8 7