Related Manuals for Philips PPX5110
Summary of Contents for Philips PPX5110
-
Page 1: User Manual
User Manual Pocket Projector PPX5110 Register your product and get support at www.philips.com/welcome... -
Page 2: Table Of Contents
Table of contents Overview ............3 Dear customer ............3 About this user manual ..........3 What's in the box ............3 Product highlights ............3 1 General safety information ....4 Setting up the device ..........4 Repairs ................4 Power supply ..............5 2 Overview ...........6 Back and bottom view ..........6 Side view ...............6 Front and side view ...........6... -
Page 3: Overview
Introduction Dear customer What's in the box 1 – Pico Projector (PPX 5110) Thank you for purchasing this projector. 2 – A/C Power adapter We hope you enjoy your device and its many functions! 3 – Power plugs (EU, UK, US) 4 –... -
Page 4: General Safety Information
The battery is integrated with the device. Do not dissemble and modify. The battery should be replaced by qualified service staff only. DANGER! Risk of explosion with incorrect type of batteries! Do not try to replace the battery your- self. Philips · PPX5110... -
Page 5: Power Supply
Power supply Use only a power adapter which is certified for this product (see Technical data, page 18). Check whether the mains voltage of the power supply matches the mains voltage available at the setup location. This device complies with the voltage type specified on the device. -
Page 6: Overview
2 – B Power / Mode To turn on and off the device, press the B button for eight seconds. To switch between iOS and Android mode press the B button for one second. 3 – Vents Philips · PPX5110... -
Page 7: Initial Operation
3 Initial operation Setting up the device DANGER! Place the projector on a flat surface in front of Risk of explosion with incorrect type of the projection surface. batteries! Do not try to replace the battery your- Connecting power supply self. -
Page 8: Connect To Playback Device
1 Connect the external speakers or head- phones to the projector's Audio out socket. The device speakers deactivate automatically when the external speakers or headphones are connected. 2 Connect the HDMI plug to the HDMI socket of the playback device. Philips · PPX5110... -
Page 9: Wireless Projection With Miracast- Compatible Android Devices
1 Switch the projector to Android mode. To switch between iOS and Android mode press the B button for one second. Android mode 4 In the Wireless display tab select PPX5110- xxx. 2 In the Settings of your Android phone select Network and connection. -
Page 10: Projection With Ios Devices
6 Projection with iOS devices 2 In the Settings of your iPhone select Notice PPX5110-xxx and enter the Wi-Fi password 12345678 if requested. This function has been tested with iOS 11. Other types and models may vary. Wireless Screen Mirroring... -
Page 11: Usb Screen Mirroring (Ios)
4 Select PPX5110-xxx. 2 In the Settings of your iPhone select Per- sonal Hotspot. USB Screen Mirroring (iOS) 3 Switch the Personal Hotspot to On. 1 Switch the projector to iOS mode. To switch between iOS and Android mode press the B button for one second. - Page 12 4 Connect the Lightning cable to the projec- 6 Open the Control Centre by sliding up on the tor's USB port and the other end to the screen, then select Screen Mirroring. iPhone. 7 Select PPX5110-xxx. 5 Confirm the pop-up message on your iPhone. Philips · PPX5110...
-
Page 13: Connecting The Projector To The Internet
7 Connecting the projector to the Internet Enter the IP address 192.168.49.1 in the browser 6 Select your wireless network. address of your smartphone to set up the wire- less environment. This will enable smartphone internet browsing with wireless projection. 1 Switch to iOS mode by pressing the B button for one second. -
Page 14: Service
Do not allow any moisture to reach the interior of the device. Do not spray the device with any cleaning flu- ids. Wipe over the surfaces gently. Be care- ful that you do not scratch the surfaces. Philips · PPX5110... -
Page 15: Wireless Firmware Update
Wireless firmware update The projector will automatically reboot and connect to the update server. CAUTION! Notice Risk of data loss! If the update server has new firmware it will be automatically downloaded and Do not interrupt the update process. installed. Notice Make sure that the projector is con- nected to a power source with the... -
Page 16: Troubleshooting
Screencast, Screen Sharing, Wi-Fi Direct, Wireless Display etc. • Please refer to the user manual of your Android phone to check if this function is supported and how it can be enabled. Philips · PPX5110... - Page 17 Problems Solutions When I view videos, the sound or the picture is • The available Wi-Fi bandwidth is not enough sometimes distorted or the sound is not to send the video flawless from the synchronous with the picture. smartphone to the projector. This can happen if one or more Wi-Fi networks operate in the same frequency range nearby.
-
Page 18: Appendix
Dimensions (L × W × H).....98 × 98 × 27.5 mm ..........3.86" × 3.86" × 1.08" Weight ..........215 g / 7,58 oz Package content PPX5110, AC adapter, quick start guide, carrying pouch, power plugs (EU, UK, US) Philips · PPX5110... - Page 19 This device should be installed and operated The declaration of compliance can be consulted with a minimum distance of 20 centimetres on the site www.picopix.philips.com. between the device and your body. Canada Regulatory Compliance Preservation of the environment as part of a...
- Page 20 X-GEM SAS shall not be liable for any damages or problems arising from the use of any options or any consumable materials other than those designated as original X-GEM SAS / PHILIPS products or X-GEM SAS / PHILIPS approved products.
- Page 21 PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. used under license. This product was brought to the market by X-GEM SAS, further referred to in this document as X-GEM SAS, and is the manufacturer of the product.