Executing The Test Functions Using A Pc And Powerconfig; Parameterizing Using The Powerconfig Software - Siemens 3VA1 100 A Manual

Accessories
4.11 Test devices
4.11.2.2

Executing the test functions using a PC and powerconfig

In addition to its capabilities as a stand-alone test device, the TD500 can also act as a PC
interface to the ETU.
If the TD500 test device is connected both to the ETU and a PC, the protective functions can
be triggered from a PC on which the powerconfig software is installed. A test log for the
molded case circuit breaker is generated and stored in the powerconfig project. The test log
can be printed out.
Connections between ETU - TD500 - PC
①
②
③
4.11.2.3

Parameterizing using the powerconfig software

In addition to test functions, the powerconfig software package also provides tools for
assigning parameters to ETU 5-series and 8-series.
These tools allow you to:
● assign parameters to ETU 5-series and 8-series
● store parameter settings for ETU 5-series and 8-series in the powerconfig project and
print them out
408
Plug-in connector for insertion in the test
socket on the ETU
TD500-to-ETU connecting cable
TD500 test device
④
Power supply unit
⑤
USB connecting cable
⑥
PC with powerconfig installed
3VA molded case circuit breakers
Manual, 04/2015, A5E03603177010-02