Hardware Upgrades; Serviceability Features; Warnings And Cautions - HP ProDesk 400 G4 SFF Hardware Reference Manual

Business pc
Hide thumbs Also See for ProDesk 400 G4 SFF:
Table of Contents

Advertisement

2

Hardware upgrades

Serviceability features

The computer includes features that make it easy to upgrade and service. No tools are needed for most of the
installation procedures described in this chapter. A T15 Torx or flat-bladed screwdriver is needed for some of
the installation procedures.

Warnings and cautions

Before performing upgrades be sure to carefully read all of the applicable instructions, cautions, and
warnings in this guide.
WARNING!
Disconnect the power cord from the AC outlet and allow the internal system components to cool before you
touch them.
Do not plug telecommunications or telephone connectors into the network interface controller (NIC)
receptacles.
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) outlet that is easily accessible at all times.
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup,
and proper posture, health, and work habits for computer users. The Safety & Comfort Guide also provides
important electrical and mechanical safety information. The Safety & Comfort Guide is available on the Web
at http://www.hp.com/ergo.
WARNING!
Disconnect power to the equipment before removing the enclosure.
Replace and secure the enclosure before re-energizing the equipment.
CAUTION:
Before beginning these procedures, ensure that you are discharged of static electricity by briefly touching a
grounded metal object. See
When the computer is plugged into an AC power source, voltage is always applied to the system board. You
must disconnect the power cord from the power source before opening the computer to prevent damage to
internal components.
4
Chapter 2 Hardware upgrades
To reduce the risk of personal injury from electrical shock, hot surfaces, or fire:
Energized and moving parts inside.
Static electricity can damage the electrical components of the computer or optional equipment.
Electrostatic discharge on page 41
for more information.

Advertisement

Table of Contents
loading

Table of Contents