Appendix; Using The Keypad; Features Available When Using The [Home Network] App; Accessing The User's Guide - Panasonic KX-HNK101 Operating Instructions Manual

Appendix

Using the keypad

Changing the alarm mode
1
Tap the touchpanel to light the
alarm mode buttons.
2
Tap the button of the desired
alarm mode.
R If you tap to
alarm system, enter the disarm
PIN (default: "0000") and then
tap MOKN.
Note:
R We recommend changing the PIN
from the default before operating the
alarm system. For more information,
refer to the User's Guide
(page 12).
Confirming the alarm mode
By default, the button corresponding to
the current alarm mode is lit during
normal operation. If the [Home
Network] app was used to change this
setting, the current alarm mode is not
displayed on the touchpanel.
Canceling a trigger
When the alarm system is triggered,
the keypad sounds an alert and
blinks. Use the following procedure to
stop the alert.
1
To cancel the trigger, tap
enter the disarm PIN (default:
"0000"), and then tap MOKN.
12 For assistance, please visit www.panasonic.com/support
Features available
when using the
[Home Network] app
Some of the keypad's features that are
available when using the [Home
Network] app are listed below. For
more information, refer to the User's
Guide (page 12).
disarm the
– Alarm system
You can use the app to arm and
disarm the alarm system.
– Device management
You can use the app to change the
keypad's name, select whether or
not the touchpanel's alarm mode
buttons are displayed, and turn
voice guidance and key tones on
and off.
Accessing the User's
Guide
The User's Guide is a collection of
online documentation that helps you
get the most out of the [Home
Network] app.
1
iPhone
Tap
Android™ devices
Tap
device's menu button in the app's
home screen.
2
Tap [User's Guide].
,
® ®
/iPad
in the app's home screen.
or press your mobile