Precautions In Disassembly And Reassembly Of Battery Charger - Hitachi C 6DD Technical Data And Service Manual

(7) Internal wire arrangement (See Fig. 5.)
Connect internal wires as illustrated in Fig. 5. At this time, ensure that none of the wires are pinched between
components during assembly. Mount the Knob [39], Terminal (A) [38] and Spring (F) [37] without fail.
Connect the brown internal wire of the Terminal Piece Set [55] in the "+" direction of the Housing [58].
[33]
[35]
Put internal wires
in the groove.
[31]
[32]
[50]

9-2. Precautions in disassembly and Reassembly of Battery Charger

Please refer to the Technical Data and Service Manual for precautions in disassembly and reassembly of the
Battery Charger UC 24YFA.
[39] [38]
[37]
[36]
Put internal wires in the groove.
Mount Terminal (A) [38] to the Knob [39] aligning
the hole and the protrusion and put the assembly
in the Housing [58].
[34]
Yellow
Black
Brown
[56]
[52]
Red
[57]
Fig. 5
--- 14 ---
Red
White
Brown
[58]
[55]
Blue
Caulk four internal wires.
(Black, blue, yellow and brown)