Specifications - Siemens milltronics Instruction Manual
Mlc belt scale
Hide thumbs
Also See for milltronics:
- Operating instructions manual (26 pages) ,
- Instruction manual (32 pages)
Table of Contents
Advertisement
Specifications
Accuracy
•
±1.0% of totalization over 5 to 1 operating range
Belt Width
•
metric: 450 to 1200 mm
•
imperial: 18 to 48"
Belt Speed
•
2.0 m/s (400 fpm) maximum
Capacity
•
up to 50 t/h (depending on loading and belt speed parameters)
Conveyor Incline
•
±20º from horizontal, fixed incline
•
up to ±30º with reduced accuracy
Conveyor Idler Profile
•
horizontal
Idler Diameter
•
metric: 50 or 60 mm
•
imperial: 1.90"
Idler Spacing
•
0.5 to 1.5 m (1.5 to 5 ft)
Loading
•
Minimum 1.0 kg/m (0.6 lbs/ft)
•
Maximum 30 kg/m (20 lbs/ft)
Load Cell
•
excitation: 10 V DC nominal, 15 V DC maximum
•
output: 2 mV/V excitation at rated load cell capacity
•
non-linearity: 0.03% of rated output
•
hysteresis: 0.05% of rated output
•
non-repeatability: 0.03% of rated output
•
capacity: 10 or 20 lbs.
•
overload: safe 150% of rated capacity, ultimate 300% of rated capacity
•
temperature:
-40 to 85ºC (-40 to 185ºF) operating range
-10 to 60ºC (14 to 140ºF) compensated
•
stainless steel construction
•
mounting dimensions: identical for all capacities
Hazardous Locations
•
with the use of approved intrinsically safe barrier strips
Approvals
1
• CE
1.
EMC performance available upon request.
Page 2
Milltronics MLC Belt Scale – INSTRUCTION MANUAL
7ML19985FF01
Advertisement
Table of Contents
