Adding LDAP servers
To add an LDAP server
Procedure
1.
Navigate to Network Configuration > NIS/LDAP Configuration.
2.
Click add.
3.
Modify the settings as described in the table below.
4.
Click OK.
Deleting LDAP servers
To delete an LDAP server
Procedure
1.
Navigate to Network Configuration > NIS/LDAP Configuration.
2.
Select a server to delete.
3.
Click delete.
Field / Item
Description
Server IP address or
Enter the IP address or Host name of the new LDAP server
Host name
Port
This field specifies the standard port number to use for communication
with the LDAP server. The default value is 389.
TLS Port
This field specifies the secure port to use for communication with the
LDAP server. The default value is 636.
Note: An Administrator can query the LDAP server for information
about hosts configured into netgroups using the nis-is-host-in-
netgroup and nisnetgroups-for-host commands.
Configuring name and directory services
Hitachi NAS Platform Network Administration Guide
67