Mounting Your Router - Cisco 1003 User Manual

To place your router on a desktop, shelf, or other flat, secure surface, perform the following
steps:
Step 1
Step 2

Mounting Your Router

To mount your router on a wall or other flat surface, perform the following steps:
Step 1
Plastic
foot (4)
Check that the plastic "feet" on the bottom of the router are turned so that they are
completely under the unit.
Set the router on a flat, secure surface, but place it so that you have access to the
rear panel. This orientation allows easy access to the connectors on the rear panel.
Locate the plastic feet on the bottom of the router and turn them out 90 degrees so
that the holes in the feet are exposed.
Front
Installing Your Cisco 1003 or Cisco 1004 Router
Cisco 1003 and Cisco 1004 User Guide 11