Installing the Flash Memory Card
This section explains how to install an optional PCMCIA Flash memory card. If a Flash
memory card did not come with your order, ignore this section and proceed with the next
section, "Making Network Connections."
To install the optional Flash memory (PCMCIA) card, perform the following steps:
Step 1
While pressing down on the two tabs at the top of the door, rotate the top of the
door away from the rear panel. Then lift the door away from the rear panel.
Tabs
Installing Your Cisco 1003 or Cisco 1004 Router
12VDC
Cisco 1003 and Cisco 1004 User Guide 13