Page 1 Pro L1500UH/L1500UHNL/ L1505UH/L1505UHNL/L1715SNL/ L1750UNL/L1755UNL User's Guide...
Page 3: Table Of Contents
Contents Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL/ L1715SNL/L1750UNL/L1755UNL User's Guide ..11 Introduction to Your Projector ......................... 12 Projector Features..........................12 Product Box Contents........................13 Additional Components ........................ 14 Additional Projector Software and Manuals ................... 16 Optional Equipment and Replacement Parts................. 17 Warranty and Registration Information ..................18 Notations Used in the Documentation ....................
Page 4 Connecting to a Computer for HDMI Video and Audio .............. 39 Connecting to a Computer for DVI-D Video ................40 Connecting to a Computer for 5 BNC Video................41 Connecting to a Computer for Sound..................41 Connecting to an HDBaseT Transmitter ..................42 Connecting to an External Computer Monitor................
Page 5 Setting Up Crestron RoomView Support ..................87 Controlling a Networked Projector Using Crestron RoomView ............88 Using Basic Projector Features ....................... 90 Turning On the Projector ........................90 Using the Home Screen......................... 92 Turning Off the Projector ........................94 Selecting the Language for the Projector Menus................94 Resizing the Image with the Zoom Button ..................
Page 6 Available Color Modes......................... 134 Adjusting the Brightness........................135 Constant Brightness Usage Hours ....................138 Turning On Automatic Luminance Adjustment ................. 140 Controlling the Volume with the Volume Buttons................141 Setting the Date and Time........................ 142 Date and Time Settings ....................... 143 Adjusting Projector Features .........................
Page 7 Multiple Projector Adjustment Overview ..................174 Projector Identification System for Multiple Projector Control ............175 Setting the Projector ID ......................175 Setting the Remote Control ID ....................176 Tiling Images into One Image ...................... 177 Configuring Tiling Automatically....................178 Configuring Tiling Manually..................... 180 Blending the Image Edges ......................
Page 8 Projector Reset Options - Reset Menu ..................... 235 Maintaining and Transporting the Projector ..................237 Projector Maintenance ........................237 Cleaning the Lens........................237 Cleaning the Projector Case......................238 Air Filter and Vent Maintenance ....................238 Cleaning the Air Filter......................239 Replacing the Air Filter......................
Page 9 Solutions When Wireless Authentication Fails ................268 Solutions When You Cannot Access the Projector Through the Web ......... 268 Solutions When the Image Contains Static During Network Projection ........269 Solutions When Network Alert E-Mails are Not Received............269 Where to Get Help..........................269 Technical Specifications ........................
Page 11: Pro L1500Uh/L1500Uhnl/L1505Uh/L1505Uhnl/ L1715Snl/L1750Unl/L1755Unl User's Guide
Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL/ L1715SNL/L1750UNL/L1755UNL User's Guide Welcome to the Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL/L1715SNL/L1750UNL/L1755UNL User's Guide. For a printable PDF copy of this guide, click here.
Page 12: Introduction To Your Projector
Projector Features Your projector includes these special features: Bright, high-resolution projection system • Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL: Up to 12000 lumens of brightness (white light output and color light output) Pro L1715SNL/L1750UNL/L1755UNL: Up to 15000 lumens of brightness (white light output and color...
Page 13: Product Box Contents
• Project images side by side from two separate input sources • Create one large seamless display when projecting from multiple projectors using Edge Blending • Epson's Instant Off and Direct Power On features for quick setup and shut down • Support for Crestron RoomView network monitoring systems •...
Page 14: Additional Components
Make sure your projector box included all of these parts: Projector with standard zoom lens and lens cap Cable cover Cable clip Lens connector cap Remote control Remote control batteries (two AA alkaline) Power cord Parent topic: Projector Features Additional Components Depending on how you plan to use the projector, you may need to obtain additional components.
Page 15 This allows you to mirror your smartphone or tablet screens, watch movies, and more. Contact your device manufacturer for compatible adapter options. Unless listed as available from Epson in this table, see your local computer or electronics dealer for purchase information.
Page 16: Additional Projector Software And Manuals
You can install the projector software programs listed here and view their manuals for instructions on using them. Note: If you still need help after checking this manual and the sources listed here, you can use the Epson PrivateLine Support service to get help fast. For details, see "Where to Get Help". Projector software Manual...
Page 17: Optional Equipment And Replacement Parts
Optional Equipment and Replacement Parts You can purchase screens, other optional accessories, and replacement parts from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766) in the U.S. or 800-807-7766 in Canada. Or you can purchase online at epsonstore.com...
Page 18: Warranty And Registration Information
Option or part Part number Wireless LAN module (ELPAP10) V12H731P02 HDBaseT Transmitter (ELPHD01) V12H547020 Replacement remote control 158279900 Remote control cable set (ELPKC28) V12H005C28 Passive 3D glasses for adults (ELPGS02A; Pro V12H541A20 L1500UH/L1500UHNL/L1505UH/L1505UHNL only) Passive 3D glasses for children (ELPGS02B; Pro V12H541B20 L1500UH/L1500UHNL/L1505UH/L1505UHNL only) Low ceiling mount (ELPMB47)
Page 19: Notations Used In The Documentation
In addition, Epson offers free Extra Care Road Service. In the unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico. See the Extra Care Road Service brochure for details.
Page 20: Projector Part Locations
Projector Part Locations Check the projector part illustrations to learn about the parts on your projector. Projector Parts - Front/Top Projector Parts - Rear Projector Parts - Interface Ports Projector Parts - Base Projector Parts - Control Panel Projector Parts - Remote Control Parent topic: Introduction to Your Projector Projector Parts - Front/Top...
Page 21: Projector Parts - Rear
Built-in camera Projector status lights Air filter cover/intake vent Air filter cover latch Wireless LAN module indicator light Cable cover Lens replacement cover Parent topic: Projector Part Locations Projector Parts - Rear Air exhaust vents Control panel Kensington security slot AC input Cable clip slot Interface ports...
Page 22: Projector Parts - Interface Ports
Projector Parts - Interface Ports BNC ports Computer port Audio3 port Audio1 port Monitor Out port Audio Out port Audio2 port Cable clip slot RS-232C port Remote port SDI port (not available for Pro L1715SNL) Service port HDMI port DVI-D port HDBaseT port...
Page 23: Projector Parts - Base
Network LAN port Parent topic: Projector Part Locations Projector Parts - Base Front adjustable feet Rear feet Security cable attachment point Mounting bracket holes Parent topic: Projector Part Locations...
Page 24: Projector Parts - Control Panel
Projector Parts - Control Panel On button (turns on the projector) Source Search button (searches for connected sources) Menu button (accesses projector menu system) Enter button (selects options) Left arrow button and displays the Control Panel Lock screen Down arrow button and displays a test pattern A/V Mute button (turns the video and audio on or off) Lens button (displays the lens shift, zoom, focus, and distortion adjustment screens;...
Page 25: Projector Parts - Remote Control
Projector Parts - Remote Control On button (turns on the projector) Standby button (turns off the projector) Source buttons (select an image source) Aspect button (selects the image aspect ratio) Auto button (automatically adjusts computer images)
Page 26 Freeze button (stops video action) Test Pattern button (displays a test pattern) Lens Shift button (adjusts the image position) Zoom button (changes the image size) Menu button (accesses projector menu system) Arrow buttons (move through on-screen options and move pointer) Enter button (selects options and left mouse button) A/V Mute button (turns the video and audio on or off) Page up and down buttons (scroll through image files when projecting from a computer over a...
Page 27 Light button (lights up the remote control buttons temporarily) Indicator light (lights up when the remote control is in use) Remote control signal emitter (emits remote control signals) Parent topic: Projector Part Locations...
Page 28: Setting Up The Projector
Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Attaching and Removing a Lens Attaching and Removing the Cable Cover Attaching and Removing the Cable Clip Installing Batteries in the Remote Control Projector Placement You can place the projector on almost any flat surface to project an image.
Page 29 Front Rear Front ceiling...
Page 30 Rear ceiling Caution: Be sure to leave the following amount of space around the projector to avoid blocking the air exhaust and intake vents. 19.7 inches (50 cm) 31.5 inches (80 cm) 15.7 inches (40 cm)
Page 31: Projection Distance
You can mount the projector to the ceiling at any horizontal or vertical angle. If you are installing multiple projectors next to each other, be sure to leave at least 20 inches (50 cm) of space between the projectors. Also, make sure heated air from an exhaust vent does not go into the air intake vent of another projector.
Page 32 You can also use the projector Throw Distance Calculator at epson.com/support (U.S.) or epson.ca/support (Canada). Projection distance Distance from the center of the lens to the base of the image (varies depending on vertical lens shift) Center of lens...
Page 33 Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL/L1750UNL/L1755UNL (Standard Zoom Lens) 16:10 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Vertical lens shift (2) Wide to Tele (Minimum to Top to bottom Maximum) 60 inches 78 to 128 inches –35 to 3.2 inches (199 to 326 cm) (–89 to 8 cm)
Page 34: Projector Connections
Pro L1715SNL (Standard Zoom Lens) 4:3 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Vertical lens shift (2) Wide to Tele (Minimum to Top to bottom Maximum) 60 inches 76 to 125 inches –37.8 to 1.8 inches (193 to 318 cm) (–96 to 5 cm) 80 inches...
Page 35: Connecting To Video Sources
Connecting to Video Sources Connecting to Computer Sources Connecting to an HDBaseT Transmitter Connecting to an External Computer Monitor Connecting to External Speakers Parent topic: Setting Up the Projector Related references Projector Setup Settings - Extended Menu Connecting to Video Sources Follow the instructions in these sections to connect video devices to the projector.
Page 36: Connecting To A Component-To-Bnc Video Source
Related references Projector Setup Settings - Extended Menu Connecting to a Component-to-BNC Video Source If your video source has component video ports, you can connect it to the projector using an optional component-to-BNC video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable.
Page 37: Connecting To An Sdi Video Source
Connecting to an SDI Video Source If your video source has an SDI port, you can connect it to the projector using an optional BNC video cable (Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL/L1750UNL/L1755UNL). 1. Connect the BNC video cable to your video source's SDI output port.
Page 38: Connecting To A Video Source For Sound
Connecting to a Video Source for Sound If you connected external speakers to the projector, you can connect your video source to the projector with an audio cable to play sound. Note: If you connected your video source to the projector's SDI port (Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL/L1750UNL/L1755UNL), audio output is not supported.
Page 39: Connecting To A Computer For Vga Video
Connecting to a Computer for HDMI Video and Audio Connecting to a Computer for DVI-D Video Connecting to a Computer for 5 BNC Video Connecting to a Computer for Sound Parent topic: Projector Connections Connecting to a Computer for VGA Video You can connect the projector to your computer using a VGA computer cable.
Page 40: Connecting To A Computer For Dvi-D Video
Contact Apple for compatible adapter options. Older Mac computers (2009 and earlier) may not support audio through the HDMI port. 1. Connect the HDMI cable to your computer's HDMI output port. 2. Connect the other end to the projector's HDMI port. Parent topic: Connecting to Computer Sources Connecting to a Computer for DVI-D Video...
Page 41: Connecting To A Computer For 5 Bnc Video
Connecting to a Computer for 5 BNC Video You can connect the projector to your computer using an optional VGA-to-5-BNC cable. 1. Connect the VGA connector to your computer's monitor port. 2. Connect the 5 BNC connectors to the projector's BNC ports. Parent topic: Connecting to Computer Sources Related tasks...
Page 42: Connecting To An Hdbaset Transmitter
Related tasks Connecting to External Speakers Connecting to an HDBaseT Transmitter To send an HDMI or RS-232C signal over a long distance, you can connect the projector to an optional HDBaseT transmitter using a 100Base-TX network cable. This is useful when you want to send a signal to or control the projector from a remote location, such as in a hall or event site, since you can use a network cable up to 328 feet (100 m) in length.
Page 43: Connecting To An External Computer Monitor
Related references Projector Setup Settings - Extended Menu Connecting to an External Computer Monitor If you connected a computer to the projector's Computer port, you can also connect an external monitor to the projector. This lets you see your presentation on the external monitor even when the projected image is not visible.
Page 44: Attaching And Removing A Lens
If you want to output audio from the external speakers when the projector is turned off, you need to select Communication On for the Standby Mode setting and Always On for the A/V Output setting in the projector's Extended menu. 1.
Page 45 1. Pull the lens cover off of the projector. 2. When using one of the following lenses, attach the lens connector cap: ELPLS04, ELPLU02, ELPLR04, ELPLW04, ELPLM06, ELPLM07, or ELPLL07. 3. Slide the lock lever to the Release position (as shown) until you hear it click.
Page 46 4. Insert the lens straight into the projector's lens socket with the white dot facing up. 5. Hold the lens firmly and slide the lock lever to the Lock position (as shown) until it locks.
Page 47: Removing A Lens
6. Replace the lens cover. 7. If prompted, select Yes to calibrate the lens. Note: Lens calibration helps the projector to correctly acquire the lens position and adjustment range, and can take up to 100 seconds to complete. When calibration is finished, the lens returns to the same position it was in before calibration.
Page 48: Attaching And Removing The Cable Cover
3. Pull the lens cover off of the projector. 4. Hold the lens firmly as you slide the lock lever to the Release position (as shown) until you hear it click. 5. Gently pull the lens straight out of the projector. Parent topic: Attaching and Removing a Lens Attaching and Removing the Cable Cover...
Page 49 1. Bundle the cables together using a band or other fastener (not provided). Caution: Do not bundle the power cord to the other cables. Otherwise, a fire may occur. 2. Place the cable cover on the projector as shown, guiding the cables through the notch on the base of the cable cover.
Page 50: Attaching And Removing The Cable Clip
3. Tighten both cable cover screws. To remove the cover, loosen both screws and pull the cover off of the projector. Parent topic: Setting Up the Projector Attaching and Removing the Cable Clip You can install the cable clip that came with your projector to provide additional support to the power cable.
Page 51: Installing Batteries In The Remote Control
3. Place the open cable clip around the power cable, but don't lock it into place. 4. Slide the cable clip onto the anchor and lock the clip onto the power connector as shown. To remove the cable clip, open the clip and disconnect the power cable. Then pinch the sides of the cable clip anchor and carefully remove it from the cable clip slot.
Page 52 2. Insert the batteries with the + and – ends facing as shown. 3. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame.
Page 53: Using The Projector On A Network
Note: If your projector is connected via a LAN (Ethernet) cable to a network that includes a wireless access point, you can connect to the projector wirelessly through the access point using the Epson network software.
Page 54: Selecting Wired Network Settings
2. Connect the other end of the cable to the projector's LAN port. Parent topic: Wired Network Projection Selecting Wired Network Settings Before you can project from computers, tablets, or smartphones over your network, you must select the network settings for the projector using its menu system. Note: Make sure you already connected the projector to your wired network using the LAN port.
Page 55 • Projector Keyword lets you turn on a security password to prevent access to the projector by anyone not in the room with it. The projector displays a random keyword that you must enter from a computer using the Epson iProjection software or an iOS or Android device using the Epson iProjection app.
Page 56 • Display LAN Info lets you select how the projector displays network information. You can select an option to display a QR code that lets you quickly connect your iOS or Android devices using the Epson iProjection app. Note: Use the displayed keyboard to enter the name, passwords, and keyword. Press the arrow buttons on the remote control to highlight characters and press Enter to select them.
Page 57: Wireless Network Projection
You can project over a wireless network. To do this, you must set up your projector and computer for wireless projection. Note: The Epson 802.11b/g/n wireless LAN module is not included with your projector and is optional. After setting up the projector as described here, download the network software and manuals as necessary.
Page 58 2. Slide the air filter cover latch and open the air filter cover. 3. Remove the screw securing the wireless LAN module stopper, then remove the stopper.
Page 59 4. Insert the wireless LAN module into the port. 5. Replace the wireless LAN module stopper and secure it using the screw you removed. 6. Close the air filter cover. 7. Plug in and turn on the projector. Parent topic: Wireless Network Projection Related references Optional Equipment and Replacement Parts...
Page 60: Using A Qr Code To Connect A Mobile Device
After you select the wireless network settings for your projector, you can display a QR code on the screen and use it to connect a mobile device using the Epson iProjection app. Note: Make sure you have installed the latest version of Epson iProjection on your device. Visit epson.com/iprojection (U.S.) or...
Page 61 Note: If you do not see the QR code after pressing the LAN button, press Enter to display it. 8. Start Epson iProjection on your mobile device. 9. Use the QR code reader feature to read the QR code and connect your device to the projector. Visit epson.com/iprojection...
Page 62: Using Quick Wireless Connection (Windows)
Then you can project your presentation and remove the key when you are done. Note: A USB flash drive is not included with your projector. 1. Create a Quick Wireless Connection USB Key with a USB flash drive and the Epson iProjection (Windows/Mac) software.
Page 63: Selecting Wireless Network Settings Manually
12. When you finish projecting wirelessly, select the Safely Remove Hardware option in the Windows taskbar, then remove the USB key from your computer. Note: You can share the USB key with other computers without disconnecting your computer. You may need to restart your computer to reactivate your wireless LAN connection. Parent topic: Wireless Network Projection Selecting Wireless Network Settings Manually...
Page 64 • Projector Keyword lets you turn on a security password to prevent access to the projector by anyone not in the room with it. The projector displays a random keyword that you must enter from a computer using the Epson iProjection software or an iOS or Android device using the Epson iProjection app.
Page 65 • Display LAN Info lets you select how the projector displays network information. You can select an option to display a QR code that lets you quickly connect your iOS or Android devices with the Epson iProjection app. Note: Use the displayed keyboard to enter the name, passwords and keyword. Press the arrow buttons on the remote control to highlight characters and press Enter to select them.
Page 66: Wireless Lan Menu Settings
Wireless LAN Menu Settings Setting Options Description Connection Mode Quick Selects the type of wireless connection: Advanced Quick: lets you connect to multiple smartphones, tablets, or computers directly Advanced: lets you connect to multiple smartphones, tablets, or computers via a wireless network access point Search Access Point To Search View...
Page 67: Selecting Wireless Network Settings In Windows
Setting Options Description Channel In Quick connection mode, selects the frequency band (channel) used by the wireless 11ch IP Settings DHCP Turns on DHCP if your network assigns addresses automatically; IP Address set to Off to manually enter the Subnet Mask network's IP Address, Subnet Mask, and Gateway Address Gateway Address...
Page 68: Selecting Wireless Network Settings On Mac
Selecting Wireless Network Settings on Mac Before connecting to the projector, select the correct wireless network on your Mac. 1. Click the AirPort icon on the menu bar at the top of the screen. 2. Make sure AirPort is turned on, then do one of the following: •...
Page 69 3. Select the Network menu and press Enter. 4. Select Network Configuration and press Enter. 5. Select the Wireless LAN menu and press Enter. 6. Set the Security setting to match your network settings. 7. Do one of the following depending on the network security setting you selected: •...
Page 70: Setting Up Projector Network E-Mail Alerts
8. Select your authentication protocol as the EAP Type setting. 9. To import your certification, select the certificate type (either Client Certificate or CA certificate) and press Enter. Note: You can also register a digital certificate from your web browser. Make sure to register just once or the certificate may not install correctly.
Page 71 4. Select the Notifications menu and press Enter. 5. Turn on Mail Notification. 6. Enter the IP address for the SMTP Server setting. Note: To enter the IP address using the numeric keys on the remote control, press and hold the Num button.
Page 72: Network Projector E-Mail Alert Messages
• The email address entered as the From setting • Epson Projector on the subject line • The name of the projector experiencing a problem • The IP address of the affected projector •...
Page 73 8. If your network environment uses a Crestron RoomView controller, turn on the Crestron RoomView setting to allow the projector to be detected. Note: Enabling Crestron RoomView disables the Epson Message Broadcast feature in the EasyMP Monitor software. 9. If your network environment uses a Control4 or Control4 SDDP controller, turn on the Control4 SDDP setting to allow the projector to be detected.
Page 74: Controlling A Networked Projector Using A Web Browser
Parent topic: Using the Projector on a Network Controlling a Networked Projector Using a Web Browser Once you have connected your projector to your network, you can select projector settings and control projection using a compatible web browser. This lets you access the projector remotely. Note: The web setup and control features support Microsoft Internet Explorer 9.0 or later, and Safari on networks that do not use a proxy server for connection.
Page 75 Select OSD Control Pad to change the projector's menu settings. Select Test Pattern to display a test pattern Select Remote Camera Access to take an image capture of the displayed image from a remote location Select Advanced to open the advanced menu screen. Select Status Information to view the projector's status.
Page 76: Web Control Options
Web Control Options Basic Control Note: If the Remote Password is set to On, you need to enter your user name and password. (The default username is EPSONREMOTE and the default password is guest). Returns to the Home screen Turns on the projector Input source selection controls A/V Mute button control Volume button controls...
Page 77 Returns to the Home screen Displays the projector's setting menus Use your finger or mouse to navigate the menus Returns settings to their default values Returns to the previous menu Displays help topics Note: You cannot change some settings using Epson Web Control.
Page 78 Lens Control Focus/Distortion screen Returns to the Home screen Focus adjustment slider Focus adjustment buttons Distortion adjustment slider (not available for ELPLU02) Distortion adjustment buttons (not available for ELPLU02) Displays the Focus/Distortion screen Displays the Zoom screen Displays the Lens Shift screen Displays the Test Pattern screen Displays the Memory screen Zoom screen...
Page 79 Note: Zoom is not available for the ELPLX02 and ELPLR04 lenses. Zoom adjustment slider Zoom adjustment buttons Lens Shift screen The blue square displays the current image position and the red square displays the new image position...
Page 80 Displays the vertical image position; select to change the value Moves the image position up, down, left, or right Moves the lens to the home position Displays the horizontal image position; select to change the value Test Pattern screen Displays available test patterns; select to project a test pattern Turns off test pattern display...
Page 81 Memory screen Overwrites your current settings with saved settings Saves your current settings to memory Displays a list of saved memories Erases a saved memory Renames a saved memory Status Information screen...
Page 82: Viewing An Image Capture Of The Displayed Image From A Remote Location
Returns to the Home screen Displays a list of monitored settings Displays the setting status Select to view different status information Remote Camera Access screen Displays the image you captured using the Shoot button Takes a picture of the projected image using the camera on the front of the projector Adjusts the image exposure Zooms in or out on the image you captured Parent topic:...
Page 83 • This feature is not supported when performing the following functions: Tiling, Screen Matching, Color Calibration, Lens Calibration, Message Broadcasting in the Epson Projector Management software. • Using this feature will cancel the following functions: Split Screen, A/V Mute, display of the Home screen, On-Screen Display.
Page 84 8. Select the Password setting and enter a password up to 32 alphanumeric characters long. 9. Open a web browser on a computer or mobile device connected to the projector over a network connection. 10. Enter the projector's IP address in your browser's address box to connect to Epson Web Control.
Page 85 11. Select Remote Camera Access. Note: You may need to log in to access some of the options on the Epson Web Control screen. If you see a log in window, enter your user name and password. (The default user name is...
Page 86: Crestron Roomview Support
Crestron RoomView lets you control and monitor your projector using a web browser. Note: You cannot use the Epson Web Control feature or the Message Broadcasting tool for Epson Projector Management when you use Crestron RoomView.
Page 87: Setting Up Crestron Roomview Support
4. Select the Others menu and press Enter. 5. Set the Crestron RoomView setting to On to allow the projector to be detected. Note: Enabling Crestron RoomView disables the Epson Message Broadcasting feature in the Epson Projector Management software. 6. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
Page 88: Controlling A Networked Projector Using Crestron Roomview
Parent topic: Crestron RoomView Support Related references Projector Setup Settings - Extended Menu Controlling a Networked Projector Using Crestron RoomView Once you have set up your projector to use Crestron RoomView, you can control and monitor projection using a compatible web browser. 1.
Page 89 6. To change projector, Crestron, and password settings, click the Tools tab, select settings on the displayed screen, and click Send. 7. When you finish selecting settings, click Exit to exit the program. Parent topic: Crestron RoomView Support...
Page 90: Using Basic Projector Features
Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Selecting the Language for the Projector Menus Resizing the Image with the Zoom Button Focusing the Image Using the Focus Button Setting the Lens Type Setting the Screen Type Adjusting the Image Position Using Lens Shift...
Page 91 1. Connect the power cord to the projector's power inlet. 2. Plug the power cord into an electrical outlet. The projector's On/Standby light turns blue. This indicates that the projector is receiving power. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in. 3.
Page 92: Using The Home Screen
Note: If the Auto Source Search setting in the Extended menu is enabled, the projector automatically detects the input signal when you turn it on. • Change the screen output from the computer when using a laptop. • Press the button for the video source on the remote control. •...
Page 93 2. Press the arrow buttons on the remote control or control panel to navigate the screen, and press Enter to select an option. Select the video source you want to project Display the QR code Display the Help screen Display the projector's menus Select customizable menu options Select to change the Light Source Mode Select to change the Color Mode...
Page 94: Turning Off The Projector
The projector beeps twice, the laser turns off, and the Status light turns off. Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away (if necessary). 3. To transport or store the projector, make sure the Status light is off, then unplug the power cord.
Page 95: Resizing The Image With The Zoom Button
2. Press the Menu button. 3. Select the Extended menu and press Enter. 4. Select the Language setting and press Enter. 5. Select the language you want to use and press Enter. 6. Press Menu or Esc to exit the menus. Parent topic: Using Basic Projector Features Resizing the Image with the Zoom Button...
Page 96: Focusing The Image Using The Focus Button
2. Press the Lens button on the control panel repeatedly until the zoom adjustment screen appears, or press the Zoom button on the remote control. 3. Press and hold the arrow buttons on the projector's control panel or remote control to resize the image.
Page 97: Focusing The Image When Using An Optional Short Throw Lens
2. Press the Lens button on the control panel repeatedly until the focus adjustment screen appears, or press the Focus button on the remote control. 3. Press and hold the arrow buttons on the projector's control panel or remote control to adjust the focus.
Page 98 3. Press the left or right arrow buttons until the center of the image is focused. 4. Press the Focus button on the remote control or press the Lens button on the control panel repeatedly until the distortion adjustment screen appears. 5.
Page 99: Setting The Lens Type
Note: If you installed the optional ELPLU02 short throw lens and you see a message prompting you to manually adjust the image distortion, manually rotate the distortion ring counterclockwise. Adjust the focus and then rotate the distortion ring again to correct image distortion. Parent topic: Focusing the Image Using the Focus Button Setting the Lens Type...
Page 100: Adjusting The Image Position Using Lens Shift
3. Select the Extended menu and press Enter. 4. Select Display > Screen > Screen Type. You see this screen: 5. Select your screen's aspect ratio and press Enter. 6. Press the Menu button to exit. 7. Adjust the aspect ratio for the projected image, if necessary. Parent topic: Using Basic Projector Features Related concepts...
Page 101 2. Press the arrow buttons to adjust the position of the projected image as necessary. Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL/L1750UNL/L1755UNL - ELPLU03 or ELPLW05 lens Center of lens Projected image when lens shift is set to the home position Maximum range: V × 24% Note: You cannot move the image upward when the lens is shifted horizontally all the way.
Page 102 Projected image when lens shift is set to the home position Maximum range: V × 60% Maximum range when the lens is shifted horizontally all the way: V × 31% Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL/L1750UNL/L1755UNL - ELPLX02 lens Center of lens Projected image when lens shift is set to the home position Maximum range: V ×...
Page 103 Pro L1715SNL - ELPLU03 or ELPLW05 lens Center of lens Projected image when lens shift is set to the home position Maximum range: V × 16% Note: You cannot move the image upward when the lens is shifted horizontally all the way. Pro L1715SNL - ELPLU04, ELPLW06, ELPLM10, ELPLM11, ELPLM15, or ELPLL08 lens...
Page 104 Center of lens Projected image when lens shift is set to the home position Maximum range: V × 55%; maximum range when performing screen matching or color calibration: V × 45% (ELPLU04) Maximum range when the lens is shifted horizontally all the way: V × 32% Pro L1715SNL - ELPLX02 lens Center of lens Projected image when lens shift is set to the home position...
Page 105: Adjusting The Image Position Using Screen Position
Adjusting the Image Position Using Screen Position You can adjust the image position if there are margins between the edge of the image and the projected screen frame. Note: You cannot adjust the screen position if the Screen Type setting is set to 16:10 for a WUXGA projector model or 4:3 for a SGA+ projector model.
Page 106: Available Test Pattern Image Adjustments
Note: The test pattern's shape is determined by the Screen Type setting. Be sure to set the correct screen type before adjusting with the test pattern. 1. Turn on the projector. 2. Press the Test Pattern button on the remote control or the down arrow button on the control panel. 3.
Page 107: Adjusting The Image Height
Menu Settings Image Color Mode White Balance Advanced • Gamma • RGBCMY Settings Geometry Correction Brightness Settings Extended Display Color Calibration Multi-Projection Except for custom Gamma settings Except for the Screen, Panel Alignment, and Color Uniformity settings Except for the Black Level, Scale, Color Uniformity, and Color Adjustment settings Parent topic: Displaying a Test Pattern Adjusting the Image Height...
Page 108: Image Shape
3. If the image is tilted, rotate the rear feet to adjust their height. If the projected image is unevenly rectangular, you need to adjust the image shape. Parent topic: Using Basic Projector Features Related concepts Image Shape Image Shape You can project an evenly rectangular image by placing the projector directly in front of the center of the screen and keeping it level.
Page 109: Correcting Image Shape With H/V Keystone
Correcting Image Shape with H/V Keystone You can use the projector's H/V Keystone setting to correct the shape of an image that is unevenly rectangular on the sides. Note: You cannot combine H/V Keystone correction with other image shape correction methods. 1.
Page 110 3. Select the Settings menu and press Enter. 4. Select the Geometry Correction setting and press Enter. Note: You can also access the geometric adjustment screen by pressing the Geometry button on the remote control or the up arrow button on the control panel. 5.
Page 111 6. Use the arrow buttons on the projector or the remote control to select between vertical and horizontal keystone correction and to adjust the image shape as necessary. V-Keystone V-Balance H-Keystone H-Balance...
Page 112: Correcting Image Shape With Quick Corner
7. When you are finished, press Esc. After correction, your image is slightly smaller. Parent topic: Image Shape Related references Projector Feature Settings - Settings Menu Related tasks Displaying a Test Pattern Correcting Image Shape with Quick Corner You can use the projector's Quick Corner setting to correct the shape and size of an image that is unevenly rectangular on all sides.
Page 113 3. Select the Settings menu and press Enter. 4. Select the Geometry Correction setting and press Enter. 5. Select the Quick Corner setting and press Enter. Then press Enter again. You see the Quick Corner adjustment screen: Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a reset screen.
Page 114: Correcting Image Shape With Curved Surface
6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust. Then press Enter. 7. Press the arrow buttons to adjust the image shape as necessary. 8. When you are finished, press Esc. Parent topic: Image Shape Related references...
Page 115 Note: You can also display a pattern to aid in adjusting the projected image using the Test Pattern button on the remote control. 2. Press the Menu button. 3. Select the Settings menu and press Enter. 4. Select the Geometry Correction setting and press Enter. 5.
Page 116 7. Use the arrow buttons on the projector or the remote control to select the area you want to adjust. Then press Enter. Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a reset screen.
Page 117 9. Press the Esc button to return to the Curved Surface menu screen. 10. Repeat the previous three steps as necessary to adjust other image areas. If the image expands or contracts, continue with the next step to adjust the linearity. 11.
Page 118: Correcting Image Shape With Corner Wall
Related references Projector Feature Settings - Settings Menu Related tasks Displaying a Test Pattern Correcting Image Shape with Quick Corner Correcting Image Shape with Point Correction Correcting Image Shape with Corner Wall You can use the projector's Corner Wall setting to adjust the shape of an image projected on a surface with right angles, such as a rectangular pillar or the corner of a room.
Page 119 3. Select the Settings menu and press Enter. 4. Select the Geometry Correction setting and press Enter. 5. Select the Corner Wall setting and press Enter. Note: If you see a confirmation message, press Enter. You see this screen: 6. Select the Corner Type setting and press Enter.
Page 120 7. Select one of the following: • Horizontal Corner when the surfaces line up horizontally • Vertical Corner when the surfaces line up vertically 8. Press the Esc button to return to the Corner Wall menu screen. 9. Select the Correct Shape setting and press Enter. 10.
Page 121 Note: You can press Enter to show or hide the image and grid to check the results. 11. Press the arrow buttons on the projector or the remote control to select the area you want to adjust. Then press Enter. •...
Page 122 • For vertical corners, adjust the left and right areas using the points nearest the center of the image as your reference points. Note: To reset your adjustments, press and hold the Esc button for at least 2 seconds to display a reset screen.
Page 123: Correcting Image Shape With Point Correction
Note: If necessary, you can adjust the image tilt using the Quick Corner setting, then fine-tune your adjustments using the Point Correction setting. Parent topic: Image Shape Related references Projector Feature Settings - Settings Menu Related tasks Displaying a Test Pattern Correcting Image Shape with Quick Corner Correcting Image Shape with Point Correction Correcting Image Shape with Point Correction...
Page 124 5. Select the Point Correction setting and press Enter. Note: If you see a confirmation message, press Enter. You see this screen: 6. Select the Point Correction setting and press Enter. 7. Select the number of grid lines to display and press Enter. Note: If you need to change the color of the grid lines, select the Pattern Color setting and select a suitable color.
Page 125: Selecting An Image Source
9. Press the arrow buttons to correct the image shape in all necessary directions. Note: You can press Enter to show or hide the image and grid to check the results. 10. Press Esc to return to the previous screen and select another point to correct, if necessary. 11.
Page 126 3. Do one of the following: • Press the Search button on the remote control or the Source Search button on the projector until you see the image from the source you want. • Press the button for the source you want on the remote control. HDMI port source HDBaseT port source Computer port source...
Page 127: Remote Control Operation
Network port source SDI port source (not supported for Pro L1715SNL) BNC port source DVI-D port source • Press the Home button on the remote control and select your image source. Parent topic: Using Basic Projector Features Related references Projector Setup Settings - Extended Menu Remote Control Operation The remote control lets you control the projector from almost anywhere in the room, up to 98.4 feet (30 m) away.
Page 128 Make sure that you aim the remote control at the projector's receivers within the angles listed here. 98.4 feet (30 m) 82.0 feet (25 m) 65.6 feet (20 m) ±60° ±30° ±15° 30° 10° ±20°...
Page 129: Projection Modes
Note: To view 3D images, you must project onto the front of a silver screen designed for passive 3D images (Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL). Changing the Projection Mode Using the Remote Control Changing the Projection Mode Using the Menus...
Page 130: Changing The Projection Mode Using The Menus
The image disappears briefly and reappears flipped top-to-bottom. 3. To change projection back to the original mode, hold down the A/V Mute button for 5 to 10 seconds again. Parent topic: Projection Modes Changing the Projection Mode Using the Menus You can change the projection mode to flip the image over top-to-bottom and/or left-to-right using the projector menus.
Page 131: Image Aspect Ratio
Image Aspect Ratio The projector can display images in different width-to-height ratios called aspect ratios. Normally the input signal from your video source determines the image's aspect ratio. However, for certain images you can change the aspect ratio to fit your screen by pressing a button on the remote control. If you always want to use a particular aspect ratio for a certain video input source, you can select it using the projector's menus.
Page 132: Available Image Aspect Ratios
Parent topic: Image Aspect Ratio Related references Input Signal Settings - Signal Menu Related tasks Setting the Screen Type Available Image Aspect Ratios You can select the following image aspect ratios, depending on the selected Screen Type setting and the input signal from your image source. Note: Black bands and cropped or stretched images may project in certain aspect ratios, depending on the aspect ratio and resolution of your input signal.
Page 133: Color Mode
Aspect ratio setting Description Native Displays images as is (aspect ratio and resolution are maintained). Areas that exceed the edges of the projected screen are not projected. Parent topic: Image Aspect Ratio Related tasks Setting the Screen Type Color Mode The projector offers different Color Modes to provide optimum brightness, contrast, and color for a variety of viewing environments and image types.
Page 134: Available Color Modes
3. Press the Color Mode button on the remote control to change the Color Mode. The image appearance changes and the name of the Color Mode appears briefly on the screen. 4. To cycle through all the available Color Modes for your input signal, press the Color Mode button repeatedly.
Page 135: Adjusting The Brightness
Parent topic: Color Mode Adjusting the Brightness You can adjust the brightness of your projector's light source. 1. Turn on the projector and switch to the image source you want to use. 2. Press the Menu button. 3. Select the Settings menu and press Enter.
Page 136 • Custom: Allows you to select a custom brightness level between 30 to 100% Note: Some lenses will not support the maximum brightness level of the Pro L1715SNL/L1750UNL/L1755UNL and you may not be able to select or adjust some of the options on this screen. Visit epson.com/lenssupport (U.S.) or epson.com/soutienobjectifs (Canada) for details.
Page 137 8. If you selected Custom and want to maintain consistent brightness, turn on the Constant Brightness setting. Note: If you turn on Constant Brightness, you cannot change the Light Source Mode and Brightness Level settings. If you turn off Constant Brightness, the Brightness Level setting changes according to the status of the light source.
Page 138: Constant Brightness Usage Hours
Constant Brightness Usage Hours If you turn on the Constant Brightness setting, the number of hours the projector can maintain constant brightness is displayed as the Estimated Remains setting. Display level Estimated remaining hours 10000 or more hours 8000 to 9999 hours 6000 to 7999 hours 4000 to 5999 hours 2000 to 3999 hours...
Page 139 Constant Brightness off Brightness level Time before the brightness of the light source is reduced by half (approximate) Brightness Level setting Hours 100% 20000 hours 21000 hours 24000 hours 30000 hours 37000 hours 47000 hours 61000 hours 71000 hours Constant Brightness on Brightness level Time the projector can maintain constant brightness (approximate)
Page 140: Turning On Automatic Luminance Adjustment
Brightness Level setting Hours 6000 hours 10000 hours 19000 hours 29000 hours 41000 hours 56000 hours 78000 hours Note: The light source usage hours vary depending upon environmental conditions and usage. The hours listed here are an approximate and are not guaranteed. After 20000 hours of use, you may need to replace parts in the projector.
Page 141: Controlling The Volume With The Volume Buttons
3. Select the Image menu and press Enter. 4. Select the Dynamic Contrast setting, choose one of the following options, and press Enter: • High Speed to adjust brightness as soon as the scene changes. • Normal to adjust brightness at the standard speed. 5.
Page 142: Setting The Date And Time
2. To lower or raise the volume, press the Volume buttons on the remote control. A volume gauge appears on the screen. 3. To set the volume to a specific level for an input source, use the projector menus. Parent topic: Using Basic Projector Features Related references Projector Feature Settings - Settings Menu...
Page 143: Date And Time Settings
You see a screen like this: 5. Select your date and time settings. Then select Set and press Enter to confirm your changes. 6. When you are finished, press the Menu button to exit. Date and Time Settings Parent topic: Using Basic Projector Features Related concepts Password Security Types...
Page 144 Settings Options Description Daylight Saving Time Daylight Saving Time Adjusts the daylight saving time settings DST Start Daylight Saving Time: enables or DST End disables daylight saving time DST Adjustment (min) DST Start and DST End: sets the date and time to start or end daylight saving time DST Adjustment (min): sets the difference between standard and...
Page 145: Adjusting Projector Features
Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Stopping Video Action Temporarily Zooming Into and Out of Images Projector Security Features Projecting Two Images Simultaneously Using Advanced Image Adjustment Features Using Multiple Projectors Enabling Protocol Emulation Viewing 3D Images...
Page 146: Stopping Video Action Temporarily
2. To turn the picture and sound back on, press the A/V Mute button again. Note: To fade the image in and out when you use A/V Mute, turn on the Fade-out and/or Fade-in settings in the Extended menu. Note: If you selected A/V Mute as the A/V Mute Release setting in the Extended menu, you can still control the projector while A/V Mute is enabled.
Page 147: Zooming Into And Out Of Images
Zooming Into and Out of Images You can draw attention to parts of a presentation by zooming into a portion of the image and enlarging it on the screen. Note: This feature is unavailable if the Scale setting in the Signal menu is enabled. If you see a 4K Enhancement message, select Yes to disable the 4K Enhancement feature.
Page 148: Projector Security Features
• Schedule Protection password prevents anyone from changing the projector's time or schedule settings. • Remote Camera Access password prevents anyone from changing the projector's Remote Camera Access setting in the Network menu. Note: Additional security measures are available for the Remote Camera Access feature. Contact Epson for details.
Page 149: Setting A Password
Setting a Password Selecting Password Security Types Entering a Password to Use the Projector Saving a User's Logo Image to Display Parent topic: Projector Security Features Setting a Password To use password security, you must set a password. Note: The default password is set to 0000. 1.
Page 150: Selecting Password Security Types
4. Press and hold down the Num button on the remote control and use the numeric buttons to set a four-digit password. The password displays as **** as you enter it. Then you see the confirmation prompt. 5. Enter the password again. You see the message "Password accepted."...
Page 151: Entering A Password To Use The Projector
If you do not see this menu, hold down the Freeze button on the remote control for about five seconds or until the menu appears. • To prevent unauthorized use of the projector, select Power On Protection, press Enter, select On, press Enter again, and press Esc.
Page 152: Saving A User's Logo Image To Display
• If you enter an incorrect password several times in succession, the projector displays a request code and a message to contact Epson Support. Do not attempt to enter the password again. When you contact Epson Support, provide the displayed request code and proof of ownership for assistance in unlocking the projector.
Page 153 2. Press the Menu button, select the Extended menu, and press Enter. 3. Select the User's Logo setting and press Enter. You see a prompt asking if you want to use the displayed image as a user's logo. 4. Select Yes and press Enter. You see a selection box overlaying your image.
Page 154: Locking The Projector's Buttons
7. Select a zoom percentage and press Enter. You see a prompt asking if you want to save the image as the User's Logo. 8. Select Yes and press Enter. You see a completion message. 9. Press Esc to exit the message screen. 10.
Page 155 2. Select the Settings menu and press Enter. 3. Select Lock Setting and press Enter. 4. Select the Control Panel Lock setting and press Enter. Note: You can also press the left arrow button on the control panel to display the Control Panel Lock screen.
Page 156: Unlocking The Projector's Buttons
Unlocking the Projector's Buttons If the projector's buttons have been locked, hold the Enter button on the projector's control panel for seven seconds to unlock them. You can also set the Control Panel Lock setting to Off in the Settings menu.
Page 157: Installing A Security Cable
Note: If you lock the remote control buttons, you can still reset the Remote Receiver setting in the Settings menu to the default settings. Parent topic: Projector Security Features Related references Projector Feature Settings - Settings Menu Installing a Security Cable You can install two types of security cables on the projector to deter theft.
Page 158: Projecting Two Images Simultaneously
Projecting Two Images Simultaneously You can use the split screen feature to simultaneously project two images from different image sources next to each other. You can control the split screen feature using the remote control or the projector menus. Note: While you use the split screen feature, other projector features may not be available and some settings may be automatically applied to both images.
Page 159 1. Press the Split button on the remote control. The currently selected input source moves to the left side of the screen. 2. Press the Menu button. You see this screen: 3. To select an input source for the other image, select the Source setting, press Enter, select the input source, select Execute, and press Enter.
Page 160: Input Sources For Split Screen Projection
— — — — — — * Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL/L1750UNL/L1755UNL only Parent topic: Projecting Two Images Simultaneously Using Advanced Image Adjustment Features Follow the instructions in these sections to use your projector's advanced image adjustments. Using Frame Interpolation Using 4K Enhancement...
Page 161: Using Frame Interpolation
Adjusting Scaled Resolution Images (Super-resolution) Adjusting Detail Enhancement Adjusting the Color Convergence (Panel Alignment) Adjusting the Color Tone (Color Uniformity) Parent topic: Adjusting Projector Features Using Frame Interpolation You can use the projector's Frame Interpolation feature to smooth fast-moving video by comparing consecutive image frames and inserting an intermediate image frame between them.
Page 162: Using 4K Enhancement
You see a screen like this: 3. Select the level of interpolation and press Enter. 4. When you are finished, press the Menu button. Note: If your resulting images contain noise, turn off the Frame Interpolation setting. Parent topic: Using Advanced Image Adjustment Features Related references Image Quality Settings - Image Menu Projector Feature Settings - Settings Menu...
Page 163 You see a screen like this: 2. Select the Image Enhancement setting and press Enter. 3. Select the 4K Enhancement setting and press Enter. 4. Select one of the following options and press Enter: • Off to disable 4K enhancement when projecting from computers or multiple projectors •...
Page 164: Creating Image Presets
Parent topic: Using Advanced Image Adjustment Features Related references Projector Feature Settings - Settings Menu Projector Setup Settings - Extended Menu Creating Image Presets You can quickly optimize your projected image by selecting image adjustment settings and saving them as a preset you can reuse later. You can save the following settings in a preset: •...
Page 165: Using Mpeg Noise Reduction
3. Select the Image Preset Mode setting and press Enter. 4. Select one of the presets. 5. Fine-tune each setting individually and press Enter. Note: If you select a previously used preset, your new adjustments overwrite the old ones. 6. Press Menu or Esc to exit the menus. Parent topic: Using Advanced Image Adjustment Features Related references...
Page 166: Adjusting Scaled Resolution Images (Super-Resolution)
You see a screen like this: 2. Select the Image Enhancement setting and press Enter. 3. Select the MPEG Noise Reduction setting and press Enter. 4. Select the level of noise reduction and press Enter. 5. Press Menu or Esc to exit the menus. Parent topic: Using Advanced Image Adjustment Features Related tasks...
Page 167 1. Turn on the projector and switch to the image source you want to use. 2. Press the Menu button. You see a screen like this: 3. Select the Image Enhancement setting and press Enter. 4. Select the Super-resolution setting and press Enter. 5.
Page 168: Adjusting Detail Enhancement
Adjusting Detail Enhancement You can enhance the contrast in detailed areas of an image to create a more textured look. 1. Turn on the projector and switch to the image source you want to use. 2. Press the Menu button. You see a screen like this: 3.
Page 169: Adjusting The Color Convergence (Panel Alignment)
6. Press Menu or Esc to exit the menus. Parent topic: Using Advanced Image Adjustment Features Adjusting the Color Convergence (Panel Alignment) You can use the Panel Alignment feature to manually adjust the color convergence (the alignment of the red, green and blue colors) in the projected image. Note: Allow your projector to warm up for at least 10 to 15 minutes and make sure the image is in focus before you use the Panel Alignment feature.
Page 170 • B to adjust the blue color convergence Note: You can adjust only the red or blue color convergence; you cannot adjust the standard green color panel. 8. Select the Pattern Color setting and press Enter. 9. Select the pattern you want to use and press Esc. 10.
Page 171: Adjusting The Color Tone (Color Uniformity)
You see this screen: 14. Do one of the following: • If your projector's panel alignment is now correct, select Exit and press Enter to return to the Panel Alignment menu. • If your projector needs additional panel alignment, select Select intersection and adjust and press Enter.
Page 172 2. Select the Extended menu and press Enter. 3. Select the Display setting and press Enter. 4. Select the Color Uniformity setting and press Enter. You see this screen: 5. Press Enter and select On. 6. Press Esc.
Page 173: Using Multiple Projectors
7. Select the Adjustment Level setting and press Enter. 8. Press the right and left arrow buttons to adjust the level, then press Esc. 9. Select the Start Adjustments setting and press Enter. 10. Select the area of the screen that you want to adjust and press Enter. 11.
Page 174: Multiple Projector Adjustment Overview
Scaling an Image Parent topic: Adjusting Projector Features Multiple Projector Adjustment Overview If you are combining images from multiple projectors on a network, you can assign one projector as the "master" and automatically adjust all the images to match the "master" image. If the projectors are not connected to a network, you can match each projector's images manually.
Page 175: Projector Identification System For Multiple Projector Control
Related concepts Wired Network Projection Projector Identification System for Multiple Projector Control Projector Placement Image Aspect Ratio Related references Projector Feature Settings - Settings Menu Related tasks Turning On the Projector Adjusting the Image Position Using Lens Shift Adjusting the Image Position Using Screen Position Resizing the Image with the Zoom Button Focusing the Image Using the Focus Button Correcting Image Shape with Point Correction...
Page 176: Setting The Remote Control Id
3. Select the Multi-Projection setting and press Enter. 4. Select Projector ID and press Enter. 5. Press the left or right arrow buttons on the remote control to select the identification number you want to use for the projector. Then select Set and press Enter. Repeat these steps for all the other projectors you want to operate from one remote control.
Page 177: Tiling Images Into One Image
3. Hold down the ID button on the remote control while you press the numeric button that matches the projector's ID. Then release the buttons. Note: If you don't know the projector's ID, hold down the ID button and press the Home button to temporarily display the projector's ID on the screen.
Page 178: Configuring Tiling Automatically
Configuring Tiling Automatically Configuring Tiling Manually Parent topic: Using Multiple Projectors Configuring Tiling Automatically If your projectors are on a network and you have identified a master projector, you can configure tiling automatically. 1. Turn on the projector. Note: Make sure nothing is blocking the built-in camera on the front of the projector. 2.
Page 179 You see a screen like this: 6. Press the up or down arrow buttons to highlight a projector and press Enter to place a checkmark next to each projector you want to use for tiling. Then select Set and press Enter. 7.
Page 180: Configuring Tiling Manually
When setup is complete, you see a screen like this: Note: If any of the images are not positioned correctly, select Manual in step 9 to locate the image manually. 12. Select the input signal to display an image. After performing the steps here, adjust the images for any gaps and differences in color. Note: Do not change any of the projector names or IP addresses, or the images will not be adjusted automatically.
Page 181 3. Select the Extended menu and press Enter. 4. Select Multi-Projection > Tiling > Layout. 5. Select the number of rows and columns you are setting up as the Row and Column settings. Then select Set and press Enter. 6. Repeat the previous steps with each projector you are setting up before continuing with the next step.
Page 182: Blending The Image Edges
• Column Order to layout the screens from left to right, starting with A on the left 9. Repeat the previous step with each projector you are setting up before continuing with the next step. 10. Select the input signal to display an image. After performing the steps here, adjust the images for any gaps and differences in color.
Page 183 You see this screen: 5. Turn on the Edge Blending, Guide Display, and Pattern Guide settings. Note: If the projected guide is unclear, try changing the Guide Colors setting. 6. Select the edge you want to blend and press Enter. You see a screen like this: 7.
Page 184 9. Select the Blend Range setting and select the width of the blended area so that the displayed guides are at the edges of the overlapping area between the two images. 10. Press Esc to go back to the previous screen. 11.
Page 185: Adjusting The Black Level
Adjusting the Black Level When two images overlap, the overlapping area can appear differently from the areas that do not overlap. You can use the projector's Black Level setting to make the difference less noticeable. Note: You may not be able to adjust the black levels correctly if the Geometry Correction settings are set too high.
Page 186 You see this screen: 5. Select the Color Adjustment setting and press Enter. You see a screen based on the Top Edge, Bottom Edge, Right Edge, and Left Edge settings you selected for the Edge Blending setting. Note: The Color Adjustment setting is automatically adjusted when selecting Start Auto Adjustment in the Screen Matching screen.
Page 187 6. Select the area you want to adjust and press Enter. Note: The area you selected is displayed in orange. Adjust overlapping areas starting with the brightest areas first. For example, adjust area 2 to match area 1, then adjust area 3 to match area 2. 7.
Page 188 You see a screen with boundary lines indicating areas that are overlapping. The boundary lines are based on the Top Edge, Bottom Edge, Right Edge, and Left Edge settings you selected for the Edge Blending setting. 13. Use the arrow buttons to select a boundary line and press Enter. You see a screen like this displaying the points you can use to set the adjustment range: 14.
Page 189: Matching Tint And Brightness (Screen Matching)
16. Use the arrow buttons to move the point. 17. To move another point, press the Esc button and repeat the previous two steps. 18. To move another boundary line, press the Esc button repeatedly until you can select a boundary line.
Page 190: Matching The Screens Automatically
Related tasks Saving a Scheduled Event Matching the Screens Automatically You can automatically correct the brightness and tint for multiple projectors based on the brightness and tint settings you selected for the master projector. Before you start, make sure of the following: •...
Page 191: Matching The Screens Manually
5. Select Start Auto Adjustment press Enter. When adjustment starts, you see an adjustment pattern. Adjustment is complete when you see a displayed image. After automatic adjustment, the Color Uniformity and Color Matching settings are returned to their default values. Parent topic: Matching Tint and Brightness (Screen Matching) Related concepts...
Page 192 3. Select the Multi-Projection setting and press Enter. 4. Select the Screen Matching setting and press Enter. You see this screen: 5. Select the Color Matching setting and press Enter. You see this screen: 6. Press the left or right arrow buttons to select a value for the Adjustment Level setting. Note: There are eight adjustment levels ranging from white to black and you can adjust each level individually.
Page 193: Scaling An Image
9. Repeat the previous three steps as necessary to adjust each adjustment level. Parent topic: Matching Tint and Brightness (Screen Matching) Scaling an Image You can project the same image from multiple projectors and use the Scale feature to crop and combine them into one large image.
Page 194 You see this screen: 5. Select one of the following as the Scale setting: • Auto to automatically adjust the clipped areas according to the Edge Blending and Tiling settings you selected • Manual to adjust the clipped areas manually 6.
Page 195: Enabling Protocol Emulation
• Full Display to adjust the image to the projector's screen size as you scale the image 7. If you selected Auto as the Scale setting, you can skip the remaining steps. If you selected Manual, adjust each of the following options as necessary: •...
Page 196: Viewing 3D Images
You see the Protocol Emulation screen. 4. Select one of the following and press Enter: • Type P for Panasonic projectors • Type M for Mitsubishi projectors • Type N for NEC projectors • Type S for Sony projectors 5. Turn the projector off and on again to enable the control code you selected. Parent topic: Adjusting Projector Features Viewing 3D Images...
Page 197 3. Select the Settings menu and press Enter. 4. Select the Memory setting and press Enter. Note: You can also access this screen by pressing the Memory button on the remote control. 5. Select one of the following options: • Memory: Saves or loads various settings; you can save up to 10 different memories...
Page 198 Note: The following settings are saved: all settings from the Image menu, the Scale setting from the Signal menu, and the Edge Blending, Black Level, and Color Matching settings from the Extended menu. • Lens Position: Saves or loads settings related to the lens such as the lens shift, focus, zoom, and distortion adjustment settings;...
Page 199: Saving A Scheduled Event
Note: To reset all saved memories of all types, select Reset All Memories in the Reset menu. 7. Press Menu or Esc to exit. Parent topic: Adjusting Projector Features Saving a Scheduled Event You can select projector commands you want to perform and schedule them as an event. You cannot schedule an event to occur at the following times: •...
Page 200: Editing A Scheduled Event
1. Press the Menu button. 2. Select the Extended menu and press Enter. 3. Select the Schedule Settings setting and press Enter. You see a screen like this: The colored boxes in the calendar indicate the following about the scheduled events: One-time event Recurring event Communication is on/off...
Page 201: Copying Menu Settings Between Projectors
You see a screen like this: 4. Press the left or right arrow buttons to highlight the date on the calendar containing the scheduled event you want to edit. 5. Press the up or down arrow buttons to highlight the event you want to edit, and press Esc. 6.
Page 202: Saving Settings To A Usb Flash Drive
Caution: If the copy process fails due to a power failure, communication error, or for any other reason, Epson will not be responsible for any repair costs incurred. The following settings will not transfer between projectors: • Info menu items •...
Page 203 2. Insert the flash drive into the wireless LAN module port. Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be saved correctly. 3. Press and hold the Esc button on the control panel or remote control as you connect the power cord to the projector's power inlet.
Page 204: Transferring Settings From A Usb Flash Drive
5. Once the projector enters standby mode, remove the flash drive. Parent topic: Copying Menu Settings Between Projectors Transferring Settings from a USB Flash Drive After saving projector settings to a USB flash drive, you can transfer them to another projector of the same model.
Page 205: Saving Settings To A Computer
3. Press and hold the Menu button on the control panel or remote control as you connect the power cord to the projector's power inlet. 4. When the On/Standby and Status lights are blue, and the Laser and Temp lights are orange, release the Menu button.
Page 206 • OS X 10.11.x • macOS 10.12.x • macOS 10.13.x 1. Turn off the projector and unplug the power cord from the projector's power inlet. 2. Connect a USB cable to your projector's Service port. 3. Connect the other end to any available USB port on your computer. 4.
Page 207: Transferring Settings From A Computer
7. Once the file has copied, do one of the following: • Windows: Open the My Computer, Computer, Windows Explorer, or File Explorer utility. Right-click the name of your projector (listed as a removable disk) and select Eject. • Mac: Drag the removable disk icon for your projector from the desktop into the trash. The projector enters standby mode.
Page 208 2. Connect a USB cable to your projector's Service port. 3. Connect the other end to any available USB port on your computer. 4. Press and hold the Menu button on the control panel or remote control as you connect the power cord to the projector's power inlet.
Page 209 All the lights start flashing to indicate that the projector's settings are being updated. When the lights stop flashing, the On/Standby light turns blue and the projector enters standby mode. Caution: Do not unplug the power cord while the lights are flashing. This could damage the projector.
Page 210: Adjusting The Menu Settings
Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Using the Projector's Menus Image Quality Settings - Image Menu Input Signal Settings - Signal Menu Projector Feature Settings - Settings Menu Projector Setup Settings - Extended Menu Projector Network Settings - Network Menu Projector Information Display - Info Menu...
Page 211 You see the menu screen displaying the Image menu settings. 2. Press the up or down arrow button to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3.
Page 212: Image Quality Settings - Image Menu
Image Quality Settings - Image Menu Settings on the Image menu let you adjust the quality of your image for the input source you are currently using. The available settings depend on the currently selected input source. To change settings for an input source, make sure the source is connected and select that source. Setting Options Description...
Page 213 Setting Options Description Sharpness Standard Adjusts the sharpness of image details Thin Line Enhancement Standard: adjusts the overall Thick Line Enhancement image sharpness Thin Line Enhancement: enhances fine details such as hair and fabric patterns Thick Line Enhancement: enhances the outline, background, and main parts of an image to make them more clear White Balance...
Page 214 Setting Options Description Image Enhancement 4K Enhancement Accepts 4K signals and enhances the output of 1080p signals Image Preset Mode Selects the image enhancement settings saved in advance Noise Reduction Reduces flickering in analog images MPEG Noise Reduction Reduces the noise or artifacts seen in MPEG video Super resolution Sharpens blurred images...
Page 215: Input Signal Settings - Signal Menu
Setting Options Description Dynamic Contrast Adjusts the luminance of the image to improve contrast by Normal tracking changes in image High Speed brightness Normal: for standard brightness adjustment High Speed: to adjust brightness as soon as the scene changes Note: The Brightness setting does not affect laser brightness. To change the laser brightness, use the Brightness Settings in the Settings menu.
Page 216 To change settings for an input source, make sure the source is connected and select that source. Setting Options Description Resolution Auto Sets the input signal resolution from an analog RGB computer Normal connection Wide Auto: detects the resolution Manual automatically Normal: for 4:3 or 5:4 screens Wide: for widescreen...
Page 217 Setting Options Description Advanced Video Range Sets the video range to match the setting of the device connected to the HDMI, DVI-D, HDBaseT, or SDI (not available for Pro L1715SNL) input ports Input Signal Specifies the signal type from input sources connected to computer ports Auto: detects signals automatically...
Page 218: Projector Feature Settings - Settings Menu
Related references Available Image Aspect Ratios Projector Feature Settings - Settings Menu Options on the Settings menu let you customize various projector features.
Page 219 Setting Options Description Geometry Correction H/V-Keystone Adjusts the projected image shape Quick Corner H/V Keystone: lets you manually Curved Surface correct the angles of the Corner Wall horizontal and vertical sides Point Correction Quick Corner: select to adjust the position of the four corners Memory Curved Surface: select to adjust the image when projecting on a...
Page 220 Setting Options Description Lock Setting Control Panel Lock Controls projector button locking to secure the projector Lens Lock Control Panel Lock: • Full Lock: locks all buttons • Partial Lock: locks all buttons except the power button • Off: no buttons locked Lens Lock: locks the focus, zoom, and lens shift settings...
Page 221 Setting Options Description Brightness Settings Light Source Mode Selects the brightness mode of the projector Brightness Level Light Source Mode: sets the Constant Brightness brightness for the light source Estimated Remains • Normal: maximum brightness • Quiet: 70% brightness with reduced fan noise •...
Page 222: Projector Setup Settings - Extended Menu
Setting Options Description Test Pattern — Displays a test pattern to assist in adjusting the image; press the left or right arrow buttons on the remote control or Enter on the control panel to cycle through the available test patterns, or Esc to cancel pattern display Memory Load Memory...
Page 223 Setting Options Description Home Screen — Adjust settings on the Home Screen Display — See the Display settings table in this topic User's Logo — Creates a screen that the projector displays to identify itself and enhance security Projection Front Selects the way the projector faces the screen so the image is Front/Ceiling...
Page 224 Setting Options Description Standby Mode Communication On Enable this setting to allow the following operations to occur Communication Off when the projector is in standby mode: • Monitor and control the projector over a network • Output audio and video to an external device (A/V Output must be set to Always On) •...
Page 225 Setting Options Description Color Calibration Start Auto Adjustment Automatically detects color deterioration and adjusts the Undo color tone Redo Start Auto Adjustment: Color Uniformity automatically adjusts the color tone for the whole image Undo and Redo: undoes or redoes the auto adjustment Color Uniformity: adjusts the color tone balance for the whole image...
Page 226 Setting Options Description Multi-Projection Projector ID Select various options when projecting from multiple Projector Grouping projectors Tiling Projector ID: sets the projector Geometry Correction to a particular ID number which allows you to use a remote Edge Blending control to individually control Black Level projectors Scale...
Page 227 Setting Description Menu Position Selects the position of the projector menu displayed on the screen Message Position Selects the position of messages displayed on the screen Messages Controls whether messages are displayed on the screen Display Background Selects the screen color or logo to display when no signal is received Startup Screen Controls whether a special screen appears when the projector...
Page 228 Remote Control Type Select Normal to use the remote control that came with the projector, or Simple to use a different Epson projector remote control and disable the remote control that came with the projector...
Page 229: Projector Network Settings - Network Menu
Setting Description AC Voltage Monitoring If you select On for this setting and the projector is turned off by any method other than pressing the power button, a power supply voltage warning message is displayed the next time the projector is turned on Lens Type Select the model number for the attached lens when using the following lenses: ELPLS04, ELPLU02, ELPLR04, ELPLW04,...
Page 230 Setting Options Description Net. Info - Wireless LAN Connection mode Displays wireless network status and details Wireless LAN Sys. Antenna level Projector Name SSID DHCP IP Address Subnet Mask Gateway Address MAC Address Region Code IPv6 Address (Manual) IPv6 Address (Auto) Net.
Page 231: Projector Information Display - Info Menu
Projector Information Display - Info Menu You can display information about the projector and input sources by viewing the Info menu. However, you cannot change any settings in the menu. Note: The total operating timer does not register any hours until you have used the projector for at least 10 hours.
Page 232 Setting Options Description Projector Info Total Op. Time Displays the number of hours the projector has been used in its operating life Operation Hours Displays the number of hours the projector has been used since it was turned on Source Displays the name of the port to which the current input source is connected Input Signal...
Page 233: Event Id Code List
Setting Options Description Light Source Info Light Source Hours Displays the number of operating hours for each of the projector's Light Source Mode settings Estimated Remains If the Constant Brightness setting is enabled, displays the remaining number of hours the projector can maintain constant brightness Version Main...
Page 234 Key exchange failed. Check the wireless LAN security settings and make sure that the security certificate is installed correctly. 0920 The internal power supply that saves your clock settings is running low. Contact Epson for help. Parent topic: Projector Information Display - Info Menu...
Page 235: Projector Reset Options - Reset Menu
Projector Reset Options - Reset Menu You can reset most of the projector settings to their default values using the Reset All Config option on the Reset menu. You can also reset the saved names and settings in the Save Memory list using the Reset All Memories option.
Page 236 • Projector Grouping • Screen Matching • EDID • Light Source Info • Operation Hours Parent topic: Adjusting the Menu Settings...
Page 237: Maintaining And Transporting The Projector
The only parts you should replace are the air filter and remote control batteries. If any other part needs replacing, contact Epson or an authorized Epson servicer. This projector uses a sealed laser light source which does not need servicing and cannot be replaced.
Page 238: Cleaning The Projector Case
Filter maintenance intervals will depend on the environment. If regular maintenance is not performed, your Epson projector will notify you when the temperature inside the projector has reached a high level. Do not wait until this warning appears to maintain your projector filter as prolonged exposure to high temperatures may reduce the life of your projector or laser.
Page 239: Cleaning The Air Filter
Related references Projector Light Status Cleaning the Air Filter You need to clean the projector's air filter in the following situations: • The filter or vents get dusty. • You see a message telling you to clean it. • The projector's Filter light is orange or flashes orange. 1.
Page 240 3. Pull the air filter out of the projector. 4. Tap each side of the air filter 4 to 5 times to shake off any excess dust. Caution: Do not use excessive force when tapping the air filter, or it may crack and become unusable.
Page 241 5. Vacuum the front of the air filter (the side with the tabs) to remove any remaining dust. Note: If dust is difficult to remove or the air filter is damaged, replace the air filter. 6. Place the air filter back in the projector as shown and push gently until it clicks into place. 7.
Page 242: Replacing The Air Filter
Replacing the Air Filter You need to replace the air filter in the following situations: • After cleaning the air filter, you see a message telling you to clean or replace it • The air filter is torn or damaged You can replace the air filter while the projector is mounted to the ceiling or placed on a table.
Page 243 Note: Air filters contain polypropylene. Dispose of used air filters according to local regulations. 4. Place the new air filter in the projector as shown. 5. Attach the air filter cover as shown, and press it gently until it clicks into place. Parent topic: Air Filter and Vent Maintenance Related references...
Page 244: Replacing The Remote Control Batteries
Replacing the Remote Control Batteries The remote control uses two AA manganese or alkaline batteries. Replace the batteries as soon as they run out. Caution: Use only the type of batteries specified in this manual. Do not install batteries of different types, or mix new and old batteries.
Page 245 3. Insert the batteries with the + and – ends facing as shown. 4. Replace the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame.
Page 246: Transporting The Projector
• When shipping the projector for repairs, place it in its original packing materials, if possible, or use equivalent materials with cushioning around the projector. Mark the box "Fragile." Note: Epson shall not be liable for any damages incurred during transportation. Parent topic:...
Page 247: Solving Problems
• The Help option on the Home screen can display information about common problems, if the projector is operating. • The solutions in this manual can help you solve many problems. If none of these solutions help, you can contact Epson for technical support. Parent topic: Solving Problems...
Page 248: Projector Light Status
Projector Light Status The lights on the projector indicate the projector status and let you know when a problem occurs. Check the status and color of the lights and look for a solution in the table here. On/Standby (power) light Status light Laser light Temp (temperature) light...
Page 249 • Clean or replace the air filter Flashing Orange Orange Lens Shift error; turn off the blue projector, unplug it from the electrical outlet, and contact Epson for help Flashing Flashing Internal error; turn off the projector, blue orange unplug it from the electrical outlet,...
Page 250 Flashing Orange Laser has a problem; turn off the blue projector, unplug it from the electrical outlet, and contact Epson for help Varies Varies Varies Varies Flashing It is time to clean the air filter orange Flashing...
Page 251: Viewing The Status Display
Constant Brightness setting in the Settings menu is disabled Note: If the lights display a pattern not listed in the table above, turn the projector off, unplug it, and contact Epson for help. Parent topic: Solving Problems Related concepts...
Page 252 3. Select Status Information and press Enter. 4. Press the left or right arrow buttons to view different categories of information. • Status Information: The projector's operating status • Source: Input signal information • Signal Information: Input digital signal information •...
Page 253: Projector Status Display Messages
• Maintenance: Operating time for the projector and light source Projector Status Display Messages Parent topic: Solving Problems Projector Status Display Messages Categories on the status display screens let you view information about the projector and its operation. Status Information category Information Description System...
Page 254 Information Description V-Frequency Displays the vertical frequency of the current input signal Sync Polarity Displays the sync polarity Sync Mode Displays the sync type Detected Mode Displays the detected mode of the current input signal Video Level Displays the video level of the projector Signal Information category Information Description...
Page 255 Information Description HDBaseT Level Displays the image signal information from the HDBaseT port Network Wired category Information Description Projector Name Displays the name used to identify the projector when connected to a network Connection Mode Displays the connection path for the LAN DHCP Displays the DHCP display settings IP Display...
Page 256 Maintenance category Information Description Operation Time Displays the projector's total operation time Laser Op. Time Displays the laser operating time for each Light Source Mode setting Version category Information Description Serial No. Displays the projector's serial number Main Display the projector's firmware version information Video2 Sub2...
Page 257: Using The Projector Help Displays
Status Description Temp Warning A high temperature warning occurred Internal Warning A warning regarding the internal system occurred Airflow Decline A low airflow error occurred Power Warning A power warning occurred Clean Filter An air filter notice occurred; clean the air filter Lens Error A lens error has occurred Laser Error...
Page 258: Solutions When No Image Appears
Solutions When "No Signal" Message Appears Solutions When "Not Supported" Message Appears Solutions When Only a Partial Image Appears Solutions When the Image is Not Rectangular Solutions When the Image Contains Noise or Static Solutions When the Image is Fuzzy or Blurry Solutions When the Image Brightness or Colors are Incorrect Solutions to Sound Problems Parent topic:...
Page 259: Solutions When "No Signal" Message Appears
Related concepts Projector Connections Related references Input Signal Settings - Signal Menu Projector Setup Settings - Extended Menu Related tasks Adjusting the Brightness Unlocking the Projector's Buttons Solutions When "No Signal" Message Appears If the "No Signal" message appears, try the following solutions: •...
Page 260: Displaying From A Mac Laptop
1. Hold down the laptop's Fn key and press the key labeled with a monitor icon or CRT/LCD. (See your laptop manual for details.) Wait a few seconds for an image to appear. To display on both the laptop's monitor and the projector, try pressing the same keys again. Note: On Windows 7 or later, hold down the Windows key and press P at the same time, then click Duplicate.
Page 261: Solutions When Only A Partial Image Appears
Solutions When Only a Partial Image Appears If only a partial computer image appears, try the following solutions: • Make sure you selected the correct Screen Type setting for the screen you are using. • Make sure the Scale setting in the Extended menu is turned off. •...
Page 262: Solutions When The Image Contains Noise Or Static
Related references Projector Feature Settings - Settings Menu Solutions When the Image Contains Noise or Static If the projected image seems to contain electronic interference (noise) or static, try the following solutions: • Check the cables connecting your computer or video source to the projector. They should be: •...
Page 263: Solutions When The Image Brightness Or Colors Are Incorrect
• Clean the projector lens. Note: To avoid condensation on the lens after bringing the projector in from a cold environment, let the projector warm up to room temperature before using it. • Try connecting the projector to the highest quality connection available on your input source. For example, connect to an HMDI port or component video ports for a better quality input signal.
Page 264: Solutions To Sound Problems
• Adjust the available settings on the Image menu for the current input source, such as Brightness, Contrast, Tint, Advanced, and Color Saturation. • Make sure you selected the correct Input Signal or Video Signal setting on the Signal menu, if available for your image source.
Page 265: Solving Projector Or Remote Control Operation Problems
• If the power button on the remote control does not turn on the projector, check its batteries and make sure the Remote Receiver setting is turned on in the projector's menu, if available. • The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord and contact Epson.
Page 266: Solutions To Problems With The Remote Control
• Make sure the Control Communications or Extron XTP setting in the Extended menu is set to Off if you are using the optional remote control cable set. • If you lose the remote control, you can purchase another from an authorized Epson reseller. Parent topic:...
Page 267: Solutions To Password Problems
• If you set a Epson Web Control password and forgot the user ID or password, try entering the following: • User ID: EPSONWEB • Default password: admin • If you set a Remote password (in Epson Web Control) and forgot the user ID or password, try entering the following: • User ID: EPSONREMOTE • Default password: guest •...
Page 268: Solutions When Wireless Authentication Fails
Solutions When Wireless Authentication Fails Solutions When You Cannot Access the Projector Through the Web Solutions When the Image Contains Static During Network Projection Solutions When Network Alert E-Mails are Not Received Parent topic: Solving Problems Solutions When Wireless Authentication Fails If you cannot authenticate a wireless connection, try the following solutions: •...
Page 269: Solutions When The Image Contains Static During Network Projection
Related references Projector Setup Settings - Extended Menu Projector Network Settings - Network Menu Where to Get Help If you need to contact Epson for technical support services, use the following support options. Internet Support Visit Epson's support website at epson.com/support (U.S.),...
Page 270 Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a projector support specialist by dialing (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).
Page 271: Technical Specifications
Supported Video Display Formats General Projector Specifications Note: Specifications are based on having the standard zoom lens (ELPLM15) installed. Type of display Poly-silicon TFT active matrix Resolution Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL/ L1750UNL/L1755UNL: 1920 × 1200 pixels (WUXGA) Pro L1715SNL: 1400 × 1050 pixels (SXGA+) Lens F=1.8 to 2.3...
Page 272 Brightness Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL: Normal Light Source Mode: White light output 12000 lumens (ISO 21118 standard) Color light output 12000 lumens Quiet or Extended Light Source Mode: White light output 8400 lumens (ISO 21118 standard) Pro L1715SNL/L1750UNL/L1755UN: Normal Light Source Mode:...
Page 273: Projector Light Source Specifications
Zoom ratio 1 to 1.61 (Tele-to-Wide) Noise level Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL/ L1750UNL/L1755UNL: 37 dB (Normal Light Source Mode) 30 dB (Quiet Light Source Mode) Pro L1715SNL/L1750UNL/L1755UNL: 40 dB (Normal Light Source Mode) 30 dB (Quiet Light Source Mode) Keystone correction angle ±...
Page 274: Remote Control Specifications
Height (excluding feet) 7.3 inches (185 mm) Width 23.1 inches (586 mm) Depth 19.4 inches (492 mm) Weight Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL 48.4 lb (21.9 kg) Pro L1715SNL 49.0 lb (22.2 kg) Pro L1750UNL/L1755UN 49.2 lb (22.3 kg) Parent topic: Technical Specifications...
Page 275: Projector Electrical Specifications
Note: Specifications are based on having the standard zoom lens (ELPLM15) installed. Rated frequency 50/60 Hz Power supply 100 to 240 V AC ±10% Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL: 9.6 to 4.2 A Pro L1715SNL/L1750UNL/L1755UNL: 11.0 to 4.7 A Power consumption Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL:...
Page 276: Projector Environmental Specifications
Projector Environmental Specifications Note: Specifications are based on having the standard zoom lens (ELPLM15) installed. Temperature Operating: Up to 4921 feet (1500 m): 32 to 122 °F (0 to 50 °C) 4921 feet (1500 m) to 10000 feet (3048 m) with High Altitude Mode enabled: 32 to 113 °F (0 to 45 °C) Brightness automatically dims at these altitudes/operating temperatures:...
Page 277: Supported Video Display Formats
For best results, your computer's monitor port or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
Page 278 Display format Refresh rate (in Hz) Resolution (in pixels) SDTV (480p) 720 × 480 SDTV (576p) 720 × 576 HDTV (720p) 50/60 1280 × 720 HDTV (1080i) 50/60 1920 × 1080 HDMI, DVI-D, and HDBaseT input signals 640 × 480 SVGA 800 ×...
Page 279 3, 4 4K×2K 24/25/30/50/60 3840 × 2160 3, 4 4K×2K (SMPTE) 24/50/60 4096 × 2160 SDI input signals (Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL/L1750UNL/L1755UNL only) SDTV (480i) 59.94 (SD-SDI mode) 720 × 480 SDTV (576i) 50 (SD-SDI mode) 720 × 576 HDTV (720p) 50/59.94/60 (HD-SDI mode) 1280 ×...
Page 280: Notices
FCC Compliance Statement Binding Arbitration and Class Waiver Trademarks Copyright Notice Recycling Epson offers a recycling program for end of life products. Please go to this site for information on how to return your products for proper disposal. Parent topic:...
Page 281 • Do not place your hand or any object near the projection window. The high temperature of this area could cause burns, fire, or other damage. • Do not place the projector on an unstable cart, stand, or table. • If the projector is mounted on a ceiling or wall, it should be installed by qualified technicians using mounting hardware designed for use with this projector.
Page 282 • You may need to clean the air filter and vent. A clogged air filter or vent can block ventilation needed to cool the projector. Do not use canned air, or the gases may leave a residue. • Do not store the projector outdoors for an extended length of time. •...
Page 283: Laser Safety Information
• If an error occurs in the projector, turn off the power and unplug the projector immediately. Continuing to use the projector could result in an electric shock, fire, or visual impairment. Contact Epson support. • Do not attempt to disassemble or modify the projector. The projector contains a high-power laser component.
Page 284 • When disposing of the projector, do not disassemble it. Dispose of the projector in accordance with your local or national laws and regulations. Labels are attached to the projector to indicate it is a Class 3R product and complies with FDA performance standards for laser products except for deviations pursuant to Laser Notice N.
Page 285 • Top...
Page 286: Laser Light Source Warning
The EHV indicates the hazard level for objects in front of the light source for 0.25 seconds at a distance of 7.9 inches (20 cm). The higher the value, the greater the hazard level. Lens Exposure Hazard Value Pro L1500UH/L1500UHNL/ Pro L1715SNL/L1750UNL/ L1505UH/L1505UHNL L1755UNL...
Page 287: Restriction Of Use
Lens Exposure Hazard Value Pro L1500UH/L1500UHNL/ Pro L1715SNL/L1750UNL/ L1505UH/L1505UHNL L1755UNL ELPLX02 <0.5 <0.5 ELPLU03 <0.5 <0.5 ELPLU02 <0.5 <0.5 ELPLU04 <0.5 <0.5 ELPLU05 <0.5 <0.5 ELPLW04 <0.5 ELPLW06 <0.5 ELPLM06 ELPLM10 ELPLM07 ELPLM11 ELPLL07 ELPLL08 Parent topic: Important Safety Instructions...
Page 288: List Of Safety Symbols (Corresponding To Iec60950-1 A2)
List of Safety Symbols (corresponding to IEC60950-1 A2) The following table lists the meaning of the safety symbols labeled on the equipment. Symbol Approved Standards Description IEC60417 "ON" (power) No.5007 To indicate connection to the mains. IEC60417 "OFF" (power) No.5008 To indicate disconnection from the mains.
Page 289 Symbol Approved Standards Description IEC60417 Polarity of DC power connector No.5926 To identify the positive and negative connections (the polarity) on a piece of equipment to which a DC power supply may be connected. IEC60417 Battery, general No.5001B On battery powered equipment. To identify a device for instance a cover for the battery compartment, or the connector terminals.
Page 290 Symbol Approved Standards Description IEC60417 Direct current No.5031 To indicate on the rating plate that the equipment is suitable for direct current only; to identify relevant terminals. IEC60417 Class II equipment No.5172 To identify equipment meeting the safety requirements specified for Class II equipment according to IEC 61140.
Page 291: Fcc Compliance Statement
Symbol Approved Standards Description IEC60417 Standby, partial standby No. 5266 To indicate that part of the equipment is in the ready status. ISO3864 Caution, movable parts IEC60417 To indicate that you must keep away from movable parts according to No. 5057 protection standards.
Page 292: Binding Arbitration And Class Waiver
1.3 Pre-Arbitration Steps and Notice. Before submitting a claim for arbitration, you and Epson agree to try, for sixty (60) days, to resolve any Dispute informally. If Epson and you do not reach an agreement to resolve the Dispute within the sixty (60) days), you or Epson may commence an arbitration. Notice to Epson must be addressed to: Epson America, Inc., ATTN: Legal Department, 3840 Kilroy Airport Way,...
Page 293 Orange County, California, at your option. a) Initiation of Arbitration Proceeding. If either you or Epson decides to arbitrate a Dispute, both parties agree to the following procedure:...
Page 294 Epson's last written offer, if any, to settle the Dispute, Epson will: (i) pay you $1,000 or the amount of the award, whichever is greater; (ii) pay you twice the amount of your reasonable attorney's fees, if any;...
Page 295: Trademarks
(other than a change to Epson's address) in this Agreement, Epson will obtain your affirmative assent to the applicable amendment. If you do not affirmatively assent to the applicable amendment, you are agreeing that you will arbitrate any Dispute between the parties in accordance with the language of this Section 1 (or resolve disputes as provided for in Section 1.7, if you...
Page 296: A Note Concerning Responsible Use Of Copyrighted Materials
Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third...

This manual is also suitable for:

Pro l1505uhnl Pro l1500uhnl Pro l1715snl Pro l1750unl Pro l1755unl Pro l1505uh

Epson Pro L1500UH User Manual

Pro L1500UH/L1500UHNL/L1505UH/L1505UHNL/ L1715SNL/L1750UNL/L1755UNL User's Guide

Introduction to Your Projector

Setting up the Projector

Using the Projector on a Network

Using Basic Projector Features

Adjusting Projector Features

Adjusting the Menu Settings

Maintaining and Transporting the Projector

Solving Problems

Technical Specifications

Notices

Quick Links

Related Manuals for Epson Pro L1500UH

Summary of Contents for Epson Pro L1500UH