Epson PowerLite 450W User Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Projector
  5. PowerLite 450W
  6. User manual
Epson PowerLite 450W User Manual

Epson PowerLite 450W User Manual

Epson powerlite 450w: user guide
Hide thumbs Also See for PowerLite 450W:
Table of Contents

Advertisement

Quick Links

See also: Maintenance Manual , Operating Manual
PowerLite
®
450W/460
Multimedia Projector
User' s Guide

Advertisement

Table of Contents
loading

Related Manuals for Epson PowerLite 450W

Summary of Contents for Epson PowerLite 450W

  • Page 1 PowerLite ® 450W/460 Multimedia Projector User’ s Guide...

  • Page 2: Important Safety Information

    Epson product. Epson is not responsible for any use of this information as applied to other products. Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to...
  • Page 3 Trademarks Epson and Instant Off are registered trademarks, and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PowerLite and E-TORL are registered trademarks, SizeWise is a trademark, and PrivateLine and Extra Care are service marks of Epson America, Inc.

  • Page 5: Table Of Contents

    Unpacking the Projector......12 Projector Parts ........13 Base .
  • Page 6 Connecting to Video Equipment ..... 49 Playing Sound Through the Projector ....53 Connecting a Document Camera or Other USB Device .
  • Page 7 Using the EasyMP Software ......91 Using Projector E-mail Alerts ......91 Using SNMP to Monitor the Projector.
  • Page 8 Cleaning the Projection Window ..... 98 Cleaning the Projector Case ......98 Cleaning the Air Filter .

  • Page 9: Welcome

    (PowerLite 460) of white and color light output (brightness). It also provides a native XGA (PowerLite 460) or WXGA (PowerLite 450W) resolution. You can connect it to a wide range of computers, interactive whiteboards, and video sources. You can also project from a USB storage device or over your network.

  • Page 10: Using Your Documentation

    CD). Built-in help system Provides assistance for common problems. Available from the button on the projector or the remote control. See ? Help page 110 for details. epson.com/support Download FAQs and e-mail your questions to Epson support.

  • Page 11: Registration And Warranty

    In addition, Epson offers free Extra Care unlikely event of an equipment failure, you won’t have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States or Canada. See the brochure included with your projector for details.

  • Page 12: Unpacking The Projector

    End cap See the Installation Guide for instructions on mounting the projector on a wall. Save all packaging in case you need to ship the projector. Always use the original packaging (or the equivalent) when you need to send the projector to another location. See page 107 for transportation instructions.

  • Page 13: Projector Parts

    Projector Parts Speaker Control panel Remote receiver Kensington security slot Filter cover opener Security cable attachment Remote receiver Cable cover Air exhaust vent Lamp cover screw Lamp cover Air filter cover filter Wireless LAN module slot Projection window Focus lever...

  • Page 14: Base

    Base Connection Panel Welcome Wall mounting slide plate Video port S-Video port AC power inlet RS-232C port Monitor out port USB (TypeB) port Security cable attachment Computer Audio out port 1 input and Microphone Audio in audio jack jack ports (TypeA) port port...

  • Page 15: Projector Control Panel

    Projector Control Panel Menu button Source Search button (displays (searches for connected projector menus) video sources) Power light Power button Wide button (increases image size Lamp and Temperature warning lights Keystone button (corrects screen shape) Esc button (exits menu items)

  • Page 16: Remote Control

    A/V Mute button (turns off image and audio) Aspect button (changes screen size) ® E-Zoom +/– buttons (zoom into image) Menu button (accesses projector menus) Source Search and Source buttons (select image source) Freeze button (stops image) User button (lets you assign function)

  • Page 17: Projector Dimensions

    Projector Dimensions Use the dimensions below to guide you in placing or installing the projector. With slide plate 0.33 in. (8.3 mm) 0.22 in. (5.5 mm) 6.7 in. (170 mm) 14.5 in. (369 mm) 7.0 in. 11.5 in. (292 mm) (177 mm) 19.0 in.
  • Page 18 Without slide plate 0.91 in. (23 mm) 6.1 in. (155 mm) 4.2 in. (107 mm) 6.7 in. (170 mm) 3.6 in. (92 mm) 6.2 in. (157 mm) Welcome 14.5 in. (369 mm) Mounting screw holes 6.3 in. (160 mm) 6.5 in. (166 mm) 19.0 in.

  • Page 19: Additional Components

    To receive an audio signal, you’ll need an RCA-type audio cable with two male plugs, or a stereo mini-jack audio adapter cable (with red and white jacks on one end). Optional Accessories To enhance your use of the projector, Epson offers the following optional accessories: Product Replacement lamp...
  • Page 20 You can purchase accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales). Welcome...

  • Page 21: Displaying And Adjusting The Image

    Whether you’re projecting from a computer or video equipment, you need to follow some basic steps to display your image on the screen. Follow the guidelines in this chapter for: ■ Positioning the projector Turning the projector on and off ■ Selecting the image source ■ Adjusting the image...

  • Page 22: Positioning The Projector

    Image size can vary depending on how you adjust the zoom and other settings. You can also use the Image Size Calculator on the Epson website. Height from bottom of projector to top of...
  • Page 23 PowerLite 460 (16:9 aspect ratio) Screen size Projection distance (diagonal) Wide to Tele 60 inches 19 to 26 in. (152 cm) (48 to 66 cm) 65 inches 21 to 28 in. (165 cm) (53 to 71 cm) 70 inches 22 in. (178 cm) (57 cm) 80 inches...
  • Page 24 PowerLite 450W (16:10 aspect ratio) Screen size (diagonal) 60 inches (152 cm) 70 inches (178 cm) 80 inches (203 cm) 90 inches (229 cm) 96 inches (244 cm) PowerLite 450W (4:3 aspect ratio) Screen size (diagonal) 55 inches ( 140 cm)

  • Page 25: Turning The Projector On And Off

    Turn on any connected computer or video equipment before starting the projector so it can automatically detect and display the image source. If you turn on the projector first, or have multiple pieces of connected equipment, you may have to select the image source manually (see page 28).
  • Page 26 2. Press the Ppower button on the projector or on the remote warning Never look into the lens when the lamp is on. This can damage your eyes, and is especially dangerous for children. 3. If you are prompted to enter a password, see page 70.

  • Page 27: Using The Direct Power On Function

    5. Press to exit. The setting will take effect the next time you Menu plug the projector into a power outlet or turn it on with a wall switch. Shutting Down the Projector This projector incorporates Instant Off technology. To turn it off, you can press its Ppower button as described below, unplug it, or turn off a power switch that supplies power to the projector.

  • Page 28: Selecting An Image Source

    If you don’t see the image you want, press the on the remote control or the projector until you see the image you want to project. Or, press one of the Source buttons on the remote control ( If you still can’t see an image or can’t project the same image that is on...

  • Page 29: Focusing The Image

    Focusing the Image Focusing the projector is part of the installation process. If necessary, you can re-adjust the focus at any time using the focus lever next to the air filter on the side of the projector. 1. Slide the switch to open the air filter cover on the side of the projector.

  • Page 30: Selecting The Color Mode

    Selecting the Color Mode The Color Mode adjusts the brightness, contrast, and color for various common viewing environments. Use this setting to quickly obtain a good picture. Press the option. Press it until the option you want is projected in the upper right corner.

  • Page 31: Resizing Video Images

    Converts the aspect ratio of the image to 16:9. 4:3 ratio ■ 16:9: images are elongated horizontally to fit. PowerLite 450W ■ Displays images using the full projection area and Normal: maintains the aspect ratio of the image. Choose this setting to automatically resize the image and make the best use of the display area.
  • Page 32 Displays images as is (aspect ratio and resolution are ■ Native: maintained). Black bands may appear or images may be cut off, depending on the resolution. Displaying and Adjusting the Image...

  • Page 33: Presenting With The Remote Control

    All of them can be accessed using the remote control, which lets you operate the projector from anywhere in the room—up to 19.7 feet (6 meters) away. This chapter covers: ■...

  • Page 34: Using The Remote Control

    Presenting With the Remote Control Point the remote control at the projector or at the screen. Stand within 19.7 feet (6 meters) of the projector. Aim the remote control within 30° to the side of, or 15° above or below, the remote control receivers on the projector.

  • Page 35: Stopping Action

    Stopping Action Press the button on the remote control to stop the action in Freeze your video or computer image. The image freezes but the sound continues. To restart the action, press the Freeze Freeze button Zooming In on Your Image You can zoom in on a portion of the image using the on the remote control.

  • Page 36: Controlling The Volume

    To temporarily shut off the sound and picture, press the button. A/V Mute You can also adjust the volume using the projector’s menu system. See page 65. Displaying Patterns You can display a test pattern or one of the following 4 patterns for use on a whiteboard or chalkboard: 1.

  • Page 37: Assigning A Pattern To The User Button

    You can transfer any image from your computer or video source to the projector and then use it as a pattern. If you assign it to the button as described above, you can display it any time you want by simply pressing the button on the remote control.

  • Page 38: Operating Your Computer With The Remote Control

    Before you can use the remote control to operate your computer, you Computer1 ports. Computer2 must connect a USB cable to the the projector (see page 44) and select You may need to select USB Type B specific settings on your computer to use the remote control as a mouse.

  • Page 39: Highlighting Your Presentation

    Then you can control your computer as follows: ■ Use the remote control’s Page Up move through presentation slides. Use the arrow buttons to move the cursor on the screen. ■ ■ Press the button once to left-click, or twice to double-click. Enter Press the button to right-click.

  • Page 40: Customizing The Pointer Tool

    8. Copy that folder to a USB flash memory drive (thumb drive), or other USB device. Then connect the device to the projector and begin your If a .JPG file is highly presentation. compressed, your projector...
  • Page 41 If you are not connected to another image source, the Slideshow program appears automatically. If necessary, press the arrow buttons on the remote control to highlight the device you want to present from, then press the button. Enter 3. If you need to select a subfolder on your device, press the arrow buttons to highlight the folder and press 4.

  • Page 42: Selecting Slideshow Display Options

    ■ Selecting Slideshow Display Options 1. Highlight 2. Highlight the options you want to use, and press 3. When you are finished, highlight Presenting With the Remote Control To exit the slideshow, press at the bottom left corner of the slideshow Option screen and press .

  • Page 43: Connecting To Computers, Usb Devices, And Other Equipment

    Connecting to Computers, USB Devices, and Other Equipment his chapter tells you how to connect the projector to a notebook or desktop computer or to video equipment, such as a VCR, DVD player, or video camera. You can also connect the projector to a USB storage device or digital camera.

  • Page 44: Connecting To A Computer

    You can also connect the projector to any computer that has a on page 49. standard video output (monitor) port. See page 46 for instructions. To play sound through the projector, connect an audio cable (see page 53).
  • Page 45 On Mac OS, double-click the install the software. 6. Follow the instructions on the screen to install the Epson USB Display software. If you see a “Digital Signature Warning,” select Continue Continue Anyway the first time you connect.)

  • Page 46: Connecting To The Vga Computer Port

    8. When you’re done projecting, do one of the following: Connecting to the VGA Computer Port You can connect to the projector using the VGA computer cable that came with it (the monitor port on your computer must be a D-sub 15-pin port).

  • Page 47: Connecting The Usb Cable For Remote Mouse Control

    The wireless mouse function is supported on systems with a USB port running Windows or Mac OS. 1. Connect the square end of a USB cable to the projector’s (square) USB port. 2. Connect the flat end of the cable to any available USB port on your notebook or desktop computer.

  • Page 48: Connecting An External Monitor

    First make sure your computer’s VGA cable is connected to the projector’s The projector must be turned on for the Monitor connect your monitor to the projector’s Out port to send a signal to the monitor (though it may be in standby mode). Make...

  • Page 49: Connecting To Video Equipment

    Video Video port 2. If you want to play sound through the projector, see page 53 for instructions on connecting an audio cable. Connecting to Computers, USB Devices, and Other Equipment note...

  • Page 50: Connecting An S-Video Source

    Epson; see page 19. 2. If you want to play sound through the projector, see page 53 for 3. When you’ve finished making connections, see page 25 for Connecting to Computers, USB Devices, and Other Equipment instructions on turning on the projector and page 28 for instructions on displaying and adjusting the image.

  • Page 51: Connecting A Component Video Source

    You can order the component-to-VGA cable (ELPKC19) from Epson (see page 19) or an electronics dealer. 1. Connect the component end of the cable (3 male RCA) to the color-coded Y/Cb/Cr (or Y/Pb/Pr) connectors on your player.

  • Page 52: Connecting An Rgb Video Source

    1. Connect the cable to the RGB video port on your player and the 2. You may need to change the 3. If you want to play sound through the projector, see page 53 for 4. When you’ve finished making connections, see page 25 for Connecting to Computers, USB Devices, and Other Equipment port on the projector.

  • Page 53: Playing Sound Through The Projector

    Playing Sound Through the Projector You can play sound through the projector’s speaker system or attach an external speaker system. You can also connect a microphone and output sound through the projector. You can use the Volume adjust the volume.

  • Page 54: Playing Sound From Video Equipment

    Audio1 or Audio2 jack. 2. Connect the red and white plugs on the other end to the Connecting to Computers, USB Devices, and Other Equipment jacks on the projector. R Audio Connect to audio-out ports for video equipment corresponding color-coded audio output jacks on your video source.

  • Page 55: Connecting A Microphone

    Connecting a Microphone You can connect a dynamic microphone to the projector’s port, using a 3.5 mm mini-jack cable as shown below. Use the option on the Settings menu to adjust the Mic Input Level volume. See page 66 for more information.

  • Page 56: Connecting External Speakers

    Connecting External Speakers You can output sound from the projector to external speakers with a built-in amplifier. 1. Locate the appropriate cable to connect your speakers. 2. Connect the stereo mini-jack end of the audio cable to the 3. Connect the other end of the cable to your speakers.

  • Page 57: Connecting A Document Camera Or Other Usb Device

    You can connect an interactive whiteboard, document camera, USB thumb (flash memory) drive, USB hard drive, or multimedia storage viewer, such as the Epson P-7000. You can use the projector’s Slideshow function to display JPEG images or a presentation. See page 40 for details.
  • Page 58 6. When you’re finished, press Be sure to turn off your USB device (if necessary) before you remove the device or cable from the projector. Failure to do so may damage the device and/or the projector. Connecting to Computers, USB Devices, and Other Equipment If you are connected to another image source, press the button on the remote control to go to the Slideshow program.

  • Page 59: Fine-Tuning The Projector

    Fine-Tuning the Projector ou can use the projector’s on-screen menus to adjust the image, sound, and other features. This chapter covers the following information: ■ Using the menu system Adjusting the image ■ Adjusting signal settings ■ ■ Customizing projector features Customizing power and operation ■...

  • Page 60: Using The Menu System

    Follow these steps: 1. To display the menu screen, press the 2. Use the arrow buttons on the remote control or the projector to 3. Once you’ve selected the menu, use the arrow buttons to scroll 4.

  • Page 61: Restoring The Default Settings

    Restoring the Default Settings You can use the option on any menu to restore the Reset factory-default settings for the settings in that menu. To restore all the projector settings to their factory-default values, select the menu, highlight Reset to confirm.
  • Page 62 2. Adjust the desired options as needed: note The available settings vary depending on the input source selected. setting Brightness changes the opacity of the projector’s LCD panels. You can also change the lamp’s brightness. Select Power in the Consumption Settings menu, then choose (the...

  • Page 63: Adjusting Signal Settings

    Adjusting Signal Settings Although the projector normally detects and optimizes the input signal automatically, you can use the Signal menu to make manual adjustments. In addition to changing the position of the projected image, you can correct tracking and sync for computer images, or change the aspect ratio.
  • Page 64 You can also use the remote control’s button to Auto automatically reset the projector’s Tracking, Sync, and Position settings. See page 118 for details. Fine-Tuning the Projector ■ Tracking Adjust this value to eliminate vertical stripes in computer images.

  • Page 65: Customizing Projector Features

    ■ Zoom Adjusts the image size from ■ Control Panel Lock Lets you disable all of the buttons on the projector, or all of the buttons except the Ppower button. See page 73 for more information. ■ Pointer Shape Lets you choose from three alternative pointer shapes. See page 39 for more information.
  • Page 66 Use this setting to prevent use of the remote control or to stop interference from bright fluorescent lights. Restart the projector for this setting to take effect. User Button Lets you create a shortcut to one of the following menu items: ,...

  • Page 67: Customizing Power And Operation

    Customizing Power and Operation You can use the Extended menu to customize the way the projector displays images, enable Direct Power On, use closed captioning, turn sleep mode on or off, and customize other projector operations. ■ Display Lets you turn screen messages on or off.
  • Page 68 USB port to project computer USB Display images. Select Wireless Mouse buttons like a wireless mouse. See page 38 for restrictions and details. Language Select a language to use for the projector menus and messages. (square) USB port. TypeB to use the remote control...

  • Page 69: Using The Projector Security Features

    See page 71. ■ Disable the projector’s buttons; this is useful, for example, in a classroom when you want to ensure that no one touches the projector’s buttons while you’re using the remote control. See page 73.

  • Page 70: Starting The Projector With A Password

    Fine-Tuning the Projector : Prevents unauthorized use of the ■ Power On Protect projector. After the projector is plugged in and turned on, you must enter a password to use the projector. Select press , then press Enter screen.

  • Page 71: Creating Your Own Startup Screen

    Try entering the correct password again. If you have forgotten the password, contact Epson with the ■ request code number that appears in the Password screen for assistance.

  • Page 72: Capturing The Image

    Start by displaying the image you want to use from either a computer or video source, such as a DVD player or digital camera. Then follow these steps to capture the image and transfer it to the projector: note 1. Press the When you choose an image for the user’s logo, it erases...

  • Page 73: Disabling The Projector's Buttons

    When you enable the Control Panel Lock function, you can lock all of the projector’s buttons, or all of the buttons except the Ppower button. The remote control can still be used to operate the projector. 1. Press the button, highlight the...

  • Page 74: Using Security Locking

    5. Press the To disable the Control Panel Lock function, select Panel Lock menu. Or press and hold the projector’s control panel for seven seconds. A message is displayed and the lock is released. Using Security Locking The projector includes two security locking points to prevent its theft when installed or used in public locations: ■...

  • Page 75: Using The Projector On A Network

    Network Projection Operation Guide for information on features and use. You can use EasyMP Monitor (available for Windows only) to monitor and control your projector through the network. For information on installing and using EasyMP Monitor, see the EasyMP Monitor Operation Guide.

  • Page 76: Connecting To A Wired Network

    Connecting to a Wired Network With a shielded, Category-5 Ethernet cable, you can connect the projector to your network and configure it with an IP address. You can then project from multiple computers on your network without changing any cables.
  • Page 77 If your network does not assign addresses automatically, turn ■ and enter the projector’s DHCP , and Mask Gateway Address Enter and press Enter Enter . You see a screen like the Enter IP Address Subnet , as needed. Using the Projector on a Network...
  • Page 78 10. To prevent the IP address from appearing on the standby screen, 11. When you’re done making all necessary changes, select Press Using the Projector on a Network To enter numbers, use the arrow buttons on the remote control to select each number on the screen, then press the button.

  • Page 79: Installing The Optional Wireless Lan Module

    Installing the Optional Wireless LAN Module Make sure you have the optional Wireless LAN Module. Turn off the projector and disconnect the power cord before you install the module. 1. Open the air filter cover by sliding the switch and lifting the cover.
  • Page 80 If you have the optional USB key, you can use Quick Wireless connection as described in the next section. Or, you can configure your connection manually as described on page 81. Using the Projector on a Network that came with it. Insert...

  • Page 81: Using Quick Wireless Connection

    Using Quick Wireless Connection Using the optional USB key, you can quickly connect the projector to a Windows computer wirelessly without any configuration. First, make sure you have installed the wireless module as described on page 79 and turned on the projector.
  • Page 82 3. Choose 4. Make sure the projector has a unique name, so you can identify it 5. Use the arrow buttons on the remote control to select individual 6. If you want to create a password for using PJLink to control the...

  • Page 83: Configuring The Connection

    ■ Ad Hoc mode (computer-to-computer mode) lets you connect just one computer to the projector at a time; it’s easy to set up, and the only equipment you need is a computer with a wireless (802.11g, 802.11b, or 802.11a) network card or adapter, or a...

  • Page 84: Configuring The Projector

    Quick projector at a time. You can also select this setting when you’re using the optional Epson Quick Wireless Connection USB key. ■ Advanced mode lets multiple computers access the projector at the same time and easily trade off control of the projector.
  • Page 85 7. Highlight the text box, press SSID want to assign to the projector (Quick mode), or the name of your existing wireless network (Advanced mode): Use the arrow buttons to select individual letters; then press to input a character. To add a blank space or to navigate backward...

  • Page 86: Selecting Wireless Network Settings In Windows

    3. Click Now you’re ready to connect to the projector. See the EasyMP Network Projection Operation Guide for details. Selecting Wireless Network Settings in Mac OS Before connecting to the projector, select the correct wireless network on your computer.

  • Page 87: Using Wireless Security Options

    Using Wireless Security Options The projector includes WEP and WPA data encryption security options which you can enable for network projection. Make sure the settings you select match the ones used by your network; follow the directions from your network administrator.
  • Page 88 Text2 and then Text3. 8. Check with your network administrator for directions on entering 9. For Authentication Type, select 10. When you’re done making these settings, press Using the Projector on a Network Enter to enable text input or ASCII...

  • Page 89: Enabling Wpa Security

    To add a blank space or to navigate backward and forward through the input text, highlight the arrows and and then press Enter and press Enter . You see the following Enter . Use Enter Enter Using the Projector on a Network...

  • Page 90: Enabling Data Encryption From

    2. Click the 3. Select the 4. Click For more information, see the EasyMP Network Projection Operation Guide. Using the Projector on a Network press . To toggle symbol settings or capital letters, highlight Enter the option and press . When you’re done, highlight...

  • Page 91: Using The Easymp Software

    Connecting to a projector on a different subnet ■ Using Projector E-mail Alerts When this feature is enabled, the projector sends you an e-mail alert if it has any problems. 1. Press the button on the remote control, select the...

  • Page 92: Using Snmp To Monitor The Projector

    6. Enter the IP address for the SMTP server for the projector. note If a critical problem develops with a projector which causes it to suddenly stop working, it may not be possible for the projector to 7. Enter the SMTP server’s port number. The default value is 25.
  • Page 93 255). 6. For , select Priority Gateway 7. If your network environment uses an AMX controller, select to allow the projector to be detected by AMX Device Discovery. . You see the following screen: Enter Wired Wireless Using the Projector on a Network...

  • Page 94: Using A Browser To Control The Projector

    1. Make sure the projector is set up for your network, as described 2. Open your web browser and enter the IP address of the projector 3.

  • Page 95: Using Web Remote Control

    Password protection Using Web Remote Control When you access the projector through your browser, you can display a “virtual remote control” on your computer screen. This lets you change sources and perform many of the same functions as you can with the physical remote control.
  • Page 96 ■ ■ ■ ■ ■ ■ ■ ■ Using the Projector on a Network The Computer button selects a computer signal (connected to the port). Computer1 Computer2 The Video button selects a video signal (connected to the port). S-Video The LAN button selects a network signal or wireless signal (using the optional wireless unit).

  • Page 97: Maintaining The Projector

    Guide. Refer all other servicing to qualified service ■ personnel. ■ our projector needs little maintenance. All you have to do on a Cleaning the projection window Cleaning the projector case Cleaning the air filter Replacing the air filter Replacing the lamp...

  • Page 98: Cleaning The Projection Window

    These can damage the case. To remove dirt or smears on the window, use a commercially available cloth for cleaning glasses. Cleaning the Projector Case Before cleaning, turn off the projector and unplug the power cord. ■ ■ Maintaining the Projector To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth.

  • Page 99: Cleaning The Air Filter

    Cleaning the Air Filter Your projector includes an air filter to ensure the best performance and help protect your equipment investment. If dust collects on the air filter, clean it as described here. Dust clogs prevent proper ventilation and can cause overheating, which can damage the projector.
  • Page 100 Contact your dealer or call Epson at 800-GO-EPSON (800-463-7766) to obtain a new air filter. Request part number V13H134A27. 1. Turn off the projector and unplug the power cord. 2. Slide the switch, then open the air filter cover on the side of the note 3.

  • Page 101: Replacing The Lamp

    You may also need to replace the lamp if the red. See page 111. Contact your dealer or call Epson at 800-GO-EPSON (800-463-7766). Request part number V13H010L57. Power (default), and 3500...
  • Page 102 1. Turn off the projector and unplug the power cord. Let the lamp cool fully before replacing it. 2. Let the projector cool for at least an hour (if it has been on). The In the unlikely event that the lamp has broken, small 3.
  • Page 103 6. Gently insert the new lamp along the guide rail, then push it in place. note The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash. Maintaining the Projector...
  • Page 104 8. Replace the lamp cover, then tighten its screw. note Tighten the lamp cover securely so you do not receive a lamp cover error when you turn the projector back on. 9. Reset the lamp timer as described in the next section. Maintaining the Projector into place.

  • Page 105: Resetting The Lamp Timer

    After you replace the lamp, you need to reset the lamp timer using the projector’s menu system. 1. Press the button on the remote control or on the Menu projector’s control panel. You see the main menu. 2. Select the menu and press Reset 3. Select Reset Lamp Hours 4.

  • Page 106: Replacing The Remote Control Batteries

    Keep these batteries out of the reach of children. Batteries are choking hazards and are very dangerous if swallowed. Maintaining the Projector in the Settings menu is . Make sure you have a spare lamp handy if shown. Power (default), and 3500...

  • Page 107: Transporting The Projector

    ■ When transporting the projector a long distance, first place it in a hard-shell shipping case, then pack it in a firm box with cushioning around the case. note...
  • Page 108 Maintaining the Projector...

  • Page 109: Solving Problems

    Solving Problems his chapter helps you solve problems with your projector and tells you how to contact technical support for problems you can’t solve yourself. The following information is included: ■ Using the projector’s on-screen help system What to do when the projector’s status lights flash ■...

  • Page 110: Using On-Screen Help

    1. Press the 2. Use the arrow buttons on the remote control or the projector to 3. Press the 4. To exit the help system, press the If none of the suggestions solve your problem, see additional solutions to problems in the following sections.

  • Page 111: Checking Projector Status

    The projector is warming up. Wait for the image to appear. Green The projector is operating normally. Orange The projector is in sleep or standby mode. You can unplug it or press the power button to turn it on. Flashing orange Preparing for network monitoring or cooling down.
  • Page 112 High Altitude Mode in the Operation menu (see page 68). If the projector continues to overheat after you clean the air filter, stop using the projector, disconnect the power cord, and contact Epson for help as described on page 124.

  • Page 113: Solving Projector Operation Problems

    The power cord may be defective. Disconnect the cord from the ■ outlet and contact Epson as described on page 124. If you’re using the Direct Power On function and you ■ immediately plug the power cord back in after unplugging it, the power may not turn back on.

  • Page 114: Solving Problems With The Image Or Sound

    A/V Mute picture has not been turned off temporarily. The projector may be in standby or sleep mode. If the Ppower light is orange, press the Ppower button to turn the projector on. If the power was switched off and then on again, the projector may be cooling down.
  • Page 115 If you’ve connected a computer and one or more video sources, ■ you may need to press the Source Search correct source. Allow a few seconds for the projector to sync up after pressing the button. Make sure the power for your connected equipment is turned on. ■...
  • Page 116 Make sure the correct input signal is selected in the Signal menu (see page 63). Make sure your computer’s resolution and frequency or refresh rate is supported by the projector (see page 130). If necessary, change your computer’s settings. Press the...
  • Page 117 (see page 22). ■ Make sure the lens is not fogged by condensation. You may need to wait before using the projector after moving it from a cold environment to a warm environment. setting on the Signal...
  • Page 118 Press the button on the remote control or the projector to reset the projector’s Tracking, Sync, and Position settings. If further adjustment is needed, you can fine-tune the...
  • Page 119 Power Consumption ■ Check your computer display settings to correct the color balance. ■ The projector’s lamp may need to be replaced. See page 101 for instructions. ■ Make sure the correct input signal is selected in the Signal menu (see page 64).

  • Page 120: Solving Password Problems

    If you have entered an incorrect password too many times and see a message displaying a request code, write down the code and contact Epson as described on page 124. Make sure the network cable is connected, as described on page 76.
  • Page 121 Windows, verify that you’ve enabled your computer’s connection to the access point or that your wireless card or adapter is enabled and connected to the same SSID as the projector. On a Mac, click the AirPort icon at the top of your Mac desktop to make sure AirPort is turned on and the right network is selected.
  • Page 122 Configure and Show All Settings tab. If you set up your projector to connect in DHCP mode, turn Distribute IP Addresses If you’re using AirPort and DHCP is turned off on your projector’s Access Point mode advanced settings screen, make sure is off.

  • Page 123: Solving Problems With The Remote Control

    The projector doesn’t respond to remote control commands. Point the remote control towards the projector’s receiver. Make ■ sure you are within 19.7 feet (6 meters) of the projector and within a 30° horizontal angle and a 15° vertical angle from the projector’s front or back receiver.

  • Page 124: Where To Get Help

    Speak to a Support Representative To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the included Epson PrivateLine Support card. This is the fastest way of speaking to a live representative, and it’s free.

  • Page 125: Purchase Supplies And Accessories

    Description of the problem ■ Purchase Supplies and Accessories You can purchase screens and other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).
  • Page 126 Solving Problems...

  • Page 127: Technical Specifications

    Technical Specifications General Type of display Poly-silicon TFT active matrix Resolution (native format) PowerLite 450W PowerLite 460 Color reproduction 16.8 million colors Light output (brightness) PowerLite 450W Normal mode: ECO mode: PowerLite 460 Normal mode: ECO mode: 1280 × 800 pixels (WXGA) 1024 ×...

  • Page 128: Projection Lamp

    Power Consumption, with Auto Iris setting turned on in the Image menu; see page 61) PowerLite 450W (16:10 image) 59 to 97 inches (149.8 to 246.4 cm) PowerLite 460 (4:3 image) 63 to 102 inches (160.0 to 259.1 cm) PowerLite 450W (16:10 image) 18.3 to 30.1 inches (.465 to .766 m)
  • Page 129 Remote Control Range 19.7 feet (6 meters) Batteries (2) Alkaline AA Dimensions Height 6.1 inches (155 mm) Width 19 inches (483 mm) Depth 14.5 inches (369 mm) Weight Approximately 12.6 lb (5.7 kg) Approximately 13.8 lb (6.2 kg) Electrical Rated frequency 50/60 Hz AC Power supply 100 to 240 VAC...

  • Page 130: Safety And Approvals

    To project images output from a computer, the computer’s video card must be set at a refresh rate (vertical frequency) that’s compatible with the projector. Some images are automatically resized using Epson’s SizeWize frequencies of some computers may not allow images to display correctly;...
  • Page 131 Computer, component video, composite video, and S-Video Refresh Mode rate (Hz) SXGA1—70 SXGA1—75 SXGA1—85 WXGA—60 WXGA—75 WXGA—85 SXGA2—60 SXGA2—75 SXGA2—85 SXGA3—60 SXGA3—75 SXGA3—85 WXGA1—60 WXGA2—60 WXGA+60 WXGA+75 WXGA+85 SXGA+60 SXGA+75 UXGA—60 MAC13 MAC16 MAC19 MAC19-60 MAC21 NTSC NTSC 4:43 N-PAL M-PAL PAL—60 SECAM...
  • Page 132 PowerLite Computer, component video, composite video, and S-Video Mode VGA—60 VESA—72 VESA—75 VESA—85 SVGA—56 SVGA—60 SVGA—72 SVGA—75 SVGA—85 XGA—60 XGA—70 XGA—75 XGA—85 SXGA1—70 SXGA1—75 SXGA1—85 WXGA—60 WXGA—75 WXGA—85 SXGA2—60 SXGA2—75 SXGA2—85 SXGA3—60 SXGA3—75 SXGA3—85 WXGA1—60 WXGA2—60 WXGA+—60 WXGA+—75 WXGA+—85 SXGA+60 SXGA+75 UXGA—60 WSXGA+—60*...
  • Page 133 Computer, component video, composite video, and S-Video Refresh Mode rate (Hz) MAC13 MAC16 MAC19 MAC19-60 MAC21 NTSC NTSC 4:43 N-PAL M-PAL PAL—60 SECAM SDTV (480i) SDTV (576i) SDTV (480p) SDTV (576p) HDTV (720p) 60/50 HDTV (1080i) 60/50 * Available only when you select Wide as the Resolution setting Resolution 640 ×...
  • Page 134 Technical Specifications...

  • Page 135: Notices

    Important Safety Instructions Follow these safety instructions when setting up and using the projector: ■ Do not look into the lens when the projector is on. The bright light can damage your eyes. ■ Do not place the projector on an unstable cart, stand, or table.
  • Page 136 Do not block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating. Do not operate the projector on a sofa, rug, or other soft surface, or set it on top of loose papers, which could block vents underneath your projector. If you are setting up the projector near a wall, leave at least 7.9 inches (20 cm) of...
  • Page 137 If you are not sure of the power available, consult your dealer or power company. ■ If you use the projector in a country other than where you purchased it, use the correct power cord for that country. ■...

  • Page 138: Fcc Compliance Statement

    FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 139: Software Notices

    Software Notices GNU GPL This projector product includes the open source software programs which apply the GNU General Public License Version 2 or later version ("GPL Programs"). We provide the source code of the GPL Programs until five (5) years after the discontinuation of same model of this projector product.
  • Page 140 When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs;...
  • Page 141 You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty;...
  • Page 142 Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1...
  • Page 143 If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
  • Page 144 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation;...
  • Page 145 GNU Lesser General Public License instead of this License. GNU LGPL This projector product includes the open source software programs which apply the GNU Lesser General Public License Version 2 or later version ("LGPL Programs").
  • Page 146 These LGPL Programs are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. The list of LGPL Programs is as follows and the names of author are described in the source code of the LGPL Programs.
  • Page 147 For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it.
  • Page 148 In other cases, permission to use a particular library in non-free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system.
  • Page 149 You may copy and distribute verbatim copies of the Library's complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty;...
  • Page 150 You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License.
  • Page 151 As an exception to the Sections above, you may also combine or link a "work that uses the Library" with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customer's own use and reverse engineering for debugging such modifications.
  • Page 152 It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of...
  • Page 153 If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims;...
  • Page 154 BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  • Page 155 That's all there is to it! BSD License (Berkeley Software Distribution License) This projector product includes the open source software program "University of California, Berkeley License (Berkeley Software Distribution License)" which applies the terms and conditions provided by owner of the copyright to the "BSD License".
  • Page 156 THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. libjpeg This projector product includes the open source software program "libjpeg" which applies the terms and conditions provided by owner of the copyright to the "libjpeg". The "libjpeg" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  • Page 157 This software is copyright (C) 1991-1998, Thomas G. Lane. All Rights Reserved except as specified below. Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose, without fee, subject to these conditions: If any part of the source code for this software is distributed, then this README file must be included, with this copyright and no-warranty notice unaltered;...
  • Page 158 Incorporated. GIF(sm) is a Service Mark property of CompuServe Incorporated." libpng This projector product includes the open source software program "libpng" which applies the terms and conditions provided by owner of the copyright to the "libpng". The "libpng" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  • Page 159 There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfill any of your particular purposes or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accuracy, and effort is with the user.
  • Page 160 September 12, 2004 zlib This projector product includes the open source software program "zlib" which applies the terms and conditions provided by owner of the copyright to the "zlib". The "zlib" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  • Page 161 If you redistribute modified sources, we would appreciate that you include in the file ChangeLog history information documenting your changes. libmd5-rfc This projector product includes the open source software program "libmd5-rfc" which applies the terms and conditions provided by owner of the copyright to the "libmd5-rfc".
  • Page 162 1999-05-03 lpd Original version. ncurses This projector product includes the open source software program "ncurses" which applies the terms and conditions provided by owner of the copyright to the "ncurses". The "ncurses" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
  • Page 163 General Notes mDNSResponder This projector product includes the open source software program "mDNSResponder" which applies the following license terms "Apache License Version 2.0, January 2004". List of "mDNSResponder" mDNSResponder-107.6 (only mDNSResponderPosix is used) License terms “Apache License Version 2.0, January 2004" are as follows.
  • Page 164 "Contribution" shall mean any work of authorship, including the original version of the Work and any modifications or additions to that Work or Derivative Works thereof, that is intentionally submitted to Licensor for inclusion in the Work by the copyright owner or by an individual or Legal Entity authorized to submit on behalf of the copyright owner.
  • Page 165 If the Work includes a "NOTICE" text file as part of its distribution, then any Derivative Works that You distribute must include a readable copy of the attribution notices contained within such NOTICE file, excluding those notices that do not pertain to any part of the Derivative Works, in at least one of the following places: within a NOTICE text file distributed as part of the Derivative Works;...
  • Page 166 Accepting Warranty or Additional Liability. While redistributing the Work or Derivative Works thereof, You may choose to offer, and charge a fee for, acceptance of support, warranty, indemnity, or other liability obligations and/or rights consistent with this License. However, in accepting such obligations, You may act only on Your own behalf and on Your sole responsibility, not on behalf of any other Contributor, and only if You agree to indemnify, defend, and hold each Contributor harmless for any liability incurred by, or claims asserted...

  • Page 167: Index

    USB, 44 to 46, 57 to 58 VGA, 46, 52 Capturing image, 72 Chalkboard, projecting on, 30 Cleaning air filter, 99 projection window, 98 projector case, 98 Closed captioning, 67 Color correcting, 30, 62 problems, 118 to 119 saturation, 62 settings, 62...
  • Page 168 Index Focusing image, 29 Freeze button, 35 Full aspect setting, 31 Help system, using, 110 Help, Epson, 10, 124 to 125 High Altitude mode, 68, 112, 129 iBook, connecting to, 44 Image adjusting, 28 to 32, 61 to 62 blurry, 117 to 118...
  • Page 169 Password Protect sticker, 12 protection, 69 to 71 remote access, 83 request code, 71 Pattern capturing and saving in projector, 37 to 38 displaying, 36 to 37 selecting, 66 Photo color mode, 30 Picture source, selecting, 28 Picture, see Image...
  • Page 170 USB Display, 113 using on-screen help, 110 Progressive format, 64 Projection lamp, see Lamp Projection setting, 67 Projection window, cleaning, 98 Projector cleaning, 98 dimensions, 17 disabling buttons, 73 to 74 distance from screen, 22, 128 lamp specifications, 128 monitoring remotely, 91 to 95...
  • Page 171 109 to 125 remote control problems, 123 wireless projection problems, 120 to 122 Turning off picture (using A/V Mute), 34 Turning off projector, 27 to 28 Unpacking projector, 12 button, 28, 58 cable, 44 to 46, 57 to 58...
  • Page 172 VCR, connecting, 49 to 52 VGA video cable, 46, 52 Video cables, 12, 19 to 20, 49 connecting video equipment, 49 to 52 formats, supported, 130 selecting source, 28 Video Signal setting, 64 Volume, controlling, 36 Warning lights, 111 to 112 Warranty, 11 Web browser control, 94 Web Remote Control, 95...

This manual is also suitable for:

Powerlite 460Nulink! live 2340Nulink! live 2320V11h318020

Table of Contents