To maintain projector brightness Lamp and image quality, replace the lamp as soon as possible. You may also need to replace the lamp if the light ashes Lamp red. Contact your dealer or call Epson at 800-GO-EPSON (800-463-7766). Request part number V13H010L57.
Page 2
INSTALLATION HANDBOOK Epson PowerLite 450W / 460 Lamp and Status Information Follow these steps to replace the lamp: warning 1. Turn o the projector and unplug the power cord. Let the lamp cool fully before replacing it. 2. Let the projector cool for at least an hour (if it has been on). The lamp is extremely hot immediately after use.
Page 3
INSTALLATION HANDBOOK Epson PowerLite 450W / 460 Lamp and Status Information 5. Grasp the lamp handle as shown and pull it straight out. note The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.
INSTALLATION HANDBOOK Epson PowerLite 450W / 460 Lamp and Status Information 8. Replace the lamp cover, then tighten its screw. 9. Reset the lamp timer as described in the next section. Resetting the Lamp Timer After you replace the lamp, you need to reset the lamp timer using the projector’s menu system.