Epson PowerLite 450W Installation Handbook

Epson PowerLite 450W / 460

Checking Projector Status

If your projector isn't working correctly, rst turn it o and unplug it.
Then plug the power cord back in and turn on the projector. If this
doesn't solve the problem, check the lights on top of the projector.

What To Do When the Lights Flash

The lights on top of the projector indicate the projector's status.
Power light
Lamp light
Refer to the following tables for a complete description of the
projector's status lights:
Power light status
P
Power light status
Flashing green
Green
Orange
Flashing orange
Red or flashing red
Temperature
light
Description
The projector is warming up. Wait for the image to appear.
The projector is operating normally.
The projector is in sleep or standby mode. You can unplug it or press the
P
power button to turn it on.
Preparing for network monitoring or cooling down.
There is a problem with the projector. Check the next table to diagnose the
problem.
INSTALLATION HANDBOOK
Lamp and Status Information
1