Dell PowerEdge R940 Service page 7

Hide thumbs Also See for PowerEdge R940:

Hold the PEM handle and lower the PEM until it firmly seats in place.

10.

Place the heat sinks, processors, and processor brackets for installation on a static-safe work table.

NOTE: Heat sinks, processors, processor brackets, and DIMMs are not part of the kit. They have to

be ordered separately.

11.

Flex the outer edges of the bracket around the processor ensuring that the processor is locked into the clips on

the bracket.

NOTE: Ensure that the pin 1 indicator on the bracket is aligned with the pin 1 indicator on the

processor before placing the bracket on the processor.

Figure 5. Installing processor bracket

12.

Place the heat sink on the processor and push down until the processor bracket locks onto the heat sink.