•
Never install the appliance in rooms where the ambient
temperature can fall below 0 °C.
•
If the appliance is to be fitted in a room or location where
the ambient temperature is higher than 35°C, provide
sufficient ventilation.
•
Install the appliance near the most frequently used draw-
off point to keep energy losses and waiting times to a
minimum.
•
Install the appliance in a room that permits the replacement
of the magnesium anode, and necessary maintenance
procedures.
Protection area 1
▶ Do not install in protection area 1.
▶ Install the appliance outside the protection area.
CAUTION:
▶ Make sure that the appliance is
connected to the DB board (electrical
board) with a connection to the earth
cable.
Fig. 6
Protection areas
5.3
Wall mounting
CAUTION: Appliance fall!
▶ Use sleeves and hooks (according with
the type of wall) that can hold the
appliance with the tank full.
Tronic 1000T / 2000T
Vertical installation
Fig. 7
Appliance
Standard diameter models
Slim diameter models
Table 11
Horizontal installation
6720815708-05.1V
Fig. 8
Appliance
ES050...
ES080...
ES100...
Table 12
Vertical installation
In case of horizontal installation ensure that
water outlet/inlet are vertical and facing
downwards.
Horizontal installation
Installation | 11
6720817966-08.1V
A
240
340
6720817966-05.1V
A
165
350
495
6 720 818 420 (2016/09)