Supported Management Information Base (Mib) Table - Panasonic KX-NCP500 Features Manual

3.3 Supported Management Information Base (MIB)
Table
System Group (1.3.6.1.2.1.1)
Object ID
1 sysDescr
2 sysObjectID
3 sysUpTime
4 sysContact
5 sysName
6 sysLocation
7 sysService
Interface Group (1.3.6.1.2.1.2)
Object ID
1 ifNumber
2 IfTable (NA)
2.1 IfEntry (NA)
2.1.1 ifIndex
2.1.2 ifDescr
2.1.3 ifType
2.1.4 ifMtu
2.1.5 ifSpeed
2.1.6 ifPhysAddress
2.1.7 ifAdminStatus
2.1.8 ifOperStatus
2.1.9 ifLastChange
2.1.10 ifInOctets
2.1.11 ifInUcastPkts
2.1.12 ifInNUcastPkts
2.1.14 ifInErrors
2.1.15 ifInUnKnownProtos
Item Description
Information of Hardware type and Software version of the Device.
Object identifier of this product.
Elapsed time since the system was restarted.
Device Administrator.
Name of Device.
Installation Location of Device.
Support Layer.
Item Description
The number of Network Devices.
Management Table by each Network Device.
Components of ifTable.
Each interface identifier.
Explanation of Interface.
Type of Interface.
Maximum Datagram Length which can be sent/received.
Maximum Transfer Speed.
Physical Address (MAC Address).
The desired state of the interface.
The current operational state of the interface.
The value of sysUpTime at the time the interface entered its current
operational state (up or down).
The number of Octets received.
The number of Unicast Packets delivered to a higher-layer
protocol.
The number of Non Unicast Packets delivered to a higher-layer
protocol.
The number of inbound Packets that contained errors.
The number of Packet received which are discarded because of an
unknown/unsupported protocol.

3.3 Supported Management Information Base (MIB) Table

Feature Guide 475