Electrical Connection - Sharp QW-C13F472W-DE User Manual

CHAPTER -3: INSTALLING THE MACHINE
Warning: When a drain hose longer than 4 m is used, the dishes might
remain dirty. In that case, our company will not accept responsibility.

Electrical connection

The earthed plug of your machine should be connected to an earthed outlet
supplied by suitable voltage and current. If there is no earthing installation,
have a competent electrician to carry out it. In case of usage without earthing
installed, our company will not be responsible for any loss of usage that might
occur.
The indoor fuse current value should be 10-16 A.
Your machine is set according to 220-240 V. If the mains voltage in your loca-
tion is 110 V, connect a transformer of 110/220 V and 3000 W inbetween. The
machine should not be plugged in during positioning. Always use the coated
plug supplied with your machine. Running in low voltage will cause a decline
in washing quality. The machine's electrical cable should be replaced by an
authorised service or an authorised electrician only. Failure to do so may lead
to accidents. For safety purposes, always make sure to disconnect the plug
when a wash programme is finished.
In order not to cause an electric shock, do not unplug when your hands are
wet. When disconnecting your machine from the mains supply, always pull
from the plug. Never pull the cord itself.
EN-10