Programme Follow-Up; Changing A Programme - Sharp QW-C13F472W-DE User Manual

CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING
A PROGRAMME
Operating the Machine
When the programme is started the light on the
Start/Pause goes off and Washing light is lit.
After rotating the programme
selection button and energising
the machine, the light on
the Start/Pause is lit.
Programme Monitoring
You can monitor the programme flow with the programme lights on the control panel.
Changing the Programme
If you would like change a programme while a washing programme is running on:
Press the Start/Pause key.
As long as the washing, rinsing
and drying processes are running
on, the lights for Washing, Rinsing
and Drying are on. The machine
becomes remains silent for 40-50
minutes while the drying light is on.
After the programme has
ended, the End light is lit.
Do not open the door
before the End light is lit.
When the programme is stopped,
Start/Pause light will blink.
You can select the desired
programme with the help of the
programme selection button after
the programme has stopped.
1.
2.
EN-21
By rotating the programme
selection button, energise
the machine and select
the suitable programme.
Start the programme
by pressing the Start/
Pause key.
You can start the programme
that you have newly
selected by pressing the
Start/Pause key again.
The machine determines a
new programme flow and time
according to the programme you
have launched and resumes
on that flow and time.