Table of Contents
Advertisement
#ELP_Display.book Page 15 Friday, May 14, 1999 5:39 PM
RADIO CALL INFORMATION
REPEATER OR TALKAROUND
MODE
Talkaround Mode enables you to communicate
with another radio when either:
• the repeater is not operating
—or—
• your radio is out of the repeater's range but
within communicating distance of another
radio.
NOTE: The F symbol will appear on the LCD
screen when Talkaround Mode is selected.
To select either Repeater Mode or Talkaround
Mode:
Press the preprogrammed Repeater/
Talkaround button to toggle between the two
modes. A positive indicator tone indicates that
the radio is in talkaround mode, while a negative
indicator tone indicates that the radio is in
repeater mode.
—or—
)
1.
to enter Menu Mode.
<
>
TLK ARD
2.
or
until
)
3.
to select
TLK ARD
<
>
4.
or
until
OFF
(talk through repeater)
or until
ON
(talk directly without going through repeater).
)
5.
to select the desired option.
SETTING TIGHT OR NORMAL
SQUELCH
Use this feature to filter out nuisance (unwanted)
calls and/or background noise. However,
tightening squelch could cause calls from
remote locations to be filtered out as well. In this
case, normal squelch may be more desirable.
To select tight or normal squelch:
Press the preprogrammed Squelch button to
toggle between tight and normal squelch. A
15
English
Advertisement
Table of Contents
