Pabx Access Code; To Store The Pabx Access Code; Delete The Pabx Access Code; Turn The Pabx Access Code Filter On / Off - Motorola CT111I Manual

7. PABX access code

If the CT111I is connected to a switchboard, you may need to enter a one-digit access
code in the dialling sequence to be able to connect to the outside line.
The access code will be displayed at the beginning of a number on the screen.
7.1

To store the PABX access code

s
1. Press .
3
2. Press , the display shows
h
3. Using the keypad enter the access code number.
4. Press twice to return to standby.
7.2

Delete the PABX access code

s
1. Press .
3
2. Press , the display shows
*
h
3. Press to delete the current PABX code.
4. Press twice to return to standby.
7.3

Turn the PABX access code filter on / off

When the filter is on and the CT111I receives a call form a number including the access
code, this code can be filtered by the CT111I. When the filter is off the PABX access code
will be ignored and if that number is in the blocked calls list with the access code in front of
the number it will be treated as a blocked call.
The default setting is off.
0
1. Press and hold
0
2. Press to turn on / off.
NOTE
It is recommended this feature is set to off unless you are receiving calls from switchboard
users that include the access code with the phone number.
16
OCOdE –.
OCOdE X.
for 3 seconds to enter the Filter setting mode.
PABX access code