Getting Started - Motorola CT111I Manual

1. Getting started

IMPORTANT
Do not place your CT111I in the bathroom or other humid areas.
Location
You need to place your CT111I base within 2 metres of the telephone and power socket
so that the cable will reach. The socket-outlet should be installed near the equipment and
should be easily accessible.
Connecting the handset and base
1. Plug one end of the handset curly cord into the socket on the side of the base and the
other end into the socket at the bottom of the handset.
2. Plug the line cord into the socket marked
3. Plug the power adaptor into the socket marked
plug the other end into the mains power wall socket. Switch on the mains power.
Installing and using the Micro SD card
A Micro SD card reader
The CT111I supports an Micro SD card, as the card is very small please be careful when
inserting and removing to avoid damage. Press and release the card to remove it.
Unplug the power adaptor from the base before removing or inserting the Micro SD
card.
The CT111I recording functions will only work if the Micro SD card is installed.
6
on the back of the base unit.
on the underside of the base and
A
Getting started