Philips LTC 2622/90 Installation Instruction page 20

LTC 2600 Series
VCR OUT Option
The VCR OUT option (in the RECORD SETUP menu, as shown below) is used to program the function of the VCR
output relay. The VCR OUTPUT relay controls external devices such as changing the recording speed when an
action and/or alarm occurs. The VCR output relay will remain active while there are active alarms or action. The
following functions can be programmed:
• Output:The output relay can be activated on an action, alarm, action and alarm, or off, enabling the installer to
prioritize the recording of camera pictures.
• Alarm speed:The VCR recording speed can be set to match the alarm recording speed of the VCR for an
action/alarm input, ensuring that no part of any incident is missed.
• Output relay:The output relay can be set to operate as normally closed (N/C) or normally open (N/O)
contacts.Typical VCR inputs are normally open contacts.
RECORD SETUP
*VCR OUT* SETUP 1
VEXT INPUT
SELECT VCR
TIME LAPSE
RECORD LIST
>VCR OUT
Choose:SELECT
(This completes the VCR SETUP programming.)
5. Return to the ADVANCED SETUP menu. Select the ACTION SETUP option.The LTC 2600 Series
multiplexer includes a Digital Motion Detection feature that detects movement within the camera scene.
When this feature is programmed and motion is detected, the record/display rates will increase. Using the
ACTION LIST facility, the priority of recording can be changed to include recording of camera pictures and at
the same time prioritize picture display on the monitor.
ADVANCED SETUP 3.00
SETUP 1
TIME/DATE
AUTOSET
VCR SETUP
>ACTION SETUP
ALARM SETUP
CAMERA TITLES
Choose:SELECT
VCR OUTPUT
SETUP 1
OFF
>OUTPUT
ALM/ACT SPEED 3 HR - SP
2 hr SP
ALARM REC INTERLEAVE
ACTION REC INTERLEAVE
OUPUT RELAY
^ More v
Choose:SELECT
Exit:ZOOM
Edit: <>
ACTION SETUP
SETUP 1
>ACTION DWELL
ACTION LIST
ACTION ZONES
WALKTHROUGH
DIRECTION ZONE
^ More v
Choose:SELECT
Exit:ZOOM
Edit:<>
21
Section 4 Programming - Advanced Setup
OFF
N/O
More v
Exit:ZOOM
08 sec
More v
Exit:ZOOM