System4 Advanced Setup: Configure Display; System4 Advanced Setup: Camera Sequences - Philips LTC 2622/90 Installation Instruction

LTC 2600 Series
• Multi: If Multi is selected, it will display the multiscreen view as it was originally programmed in the live view
setup. Four separate cameras may be selected for pre-position activation during alarm input. Pre-positions
programmed for selected cameras may be from 1-16 if the camera selected is a pan/tilt unit with pre-position
option or an AutoDome.
ADVANCED SETUP 3.00
SETUP 1
TIME/DATE
AUTOSET
VCR SETUP
ACTION SETUP
>ALARM SETUP
CAMERA TITLES
Choose:SELECT
Exit:ZOOM
ALARM DISPLAY MON A
INPUT 1
MODE CAM
>FULL 01
Input: 1 to 16
Default: FREEZE
Save:SELECT Exit:ZOOM
NOTE:When multiple cameras are selected in the Quad or Multialarm Display Options and the alarm is
active, the selected cameras become a group and the group will be included in the exclusive or interleave
recording function as programmed in the ALARM SETUP menu.When multiple alarms are detected, Monitor A
will automatically display a multiscreen view (3x3 for the nine channel and 4x4 on the 16 channel model).

5.4 System4 Advanced Setup: Configure Display

System4 multiplexers provide an additional option for programming through the CONFIGURE DISPLAY menu.To
access this option, you must scroll (arrow key) beyond TEXT in the menu.
CONFIGURE DISPLAY
SETUP 1
CAMERA TITLE MON A ON
CAMERA TITLE MON B ON
TEXT
CAMERA BORDERS
> VCR STATUS
DISPLAY LOCK LIST
Choose:SELECT
Edit:<>

5.5 System4 Advanced Setup: Camera Sequences

The System4 models allow sequential display of cameras on the monitor in FULL or QUAD viewing modes.
Cameras can be repeated in sequencing displays to enable important scenes to be viewed at greater frequency.
ALARM SETUP
SETUP1
ALARM DWELL
ALARM LIST
>ALARM DISPLAY MON A
ALARM INPUT
BEEPER
^ More v Choose:SELECT
Edit:<>
ALARM DISPLAY MON A
INPUT 1
PP MODE
16 >QUAD
-- --
-- --
-- --
Input: 1 to 16
Default: FREEZE
Save:SELECT
WHITE/BLACK
BLACK
ON
More v
Exit:ZOOM
08 sec
>----
DISABLE
More v
Exit:ZOOM
CAM PP
>8+2
01 16
---- ----
---- ----
---- ----
Exit:ZOOM
VCR STATUS
Set to ON for VCR status to
be shown on MON A
ON
^
Default:FREEZE
Save:SELECT Exit:ZOOM
30
Section 5 System4 Programming
ALARM DISPLAY MON A
INPUT 1
MODE CAM PP
Input: 1 to 16
Default: FREEZE
Save:SELECT Exit:ZOOM
ALARM DISPLAY MON A
INPUT 1
MODE CAM PP
01 16
---- ---- ----
---- ---- ----
---- ---- ----
Input: 1 to 16
Default: FREEZE
Save:SELECT Exit:ZOOM
Edit:^v