Connecting The Mouse Scanner - LG LSM300 Owner's Manual

Connecting the mouse scanner

1. To use the mouse scanner as an wireless mouse,
plug the supplied nano receiver into USB port
on your computer.
2. Turn on the power on the bottom of mouse
scanner.
3. You can pair the mouse scanner with the
plugged nano receiver.
,
Note
To operate the mouse well, please be sure that
your mouse is placed near the receiver. (within
10 m)
Mouse Operation
How to store the reciever
When the mouse scanner is not used or moved,
please remove the receiver from the PC and then
store it in the receiver's holder on the bottom of
the mouse scanner as shown in fugure below to
prevent it from being lost.
Notes on Receiver
The nano receiver attached to the product
(receiving equipment) can only be used with
this mouse. It will not run in other company's
products of other models and products with
other S/N under the same model.
The small size nano receiver (receiving
equipment) is likely to be lost. When move
the mouse, please load the receiver in the
receiver's holder on the bottom of the mouse.
If the receiver is lost, A/S services can hardly be
provided.
11
2