Advertisement
Re-pairing
1. Press and hold the function button for over 4 seconds to power on your
headphones and enter Bluetooth pairing mode. You will hear a voice
message instructing you to wait for the Bluetooth connection. The
red-blue indicator will blink.
2. Enable Bluetooth on your phone to pair with the headphones.
The headphones will enter Bluetooth pairing mode if they are not
connected to a phone within 3 minutes of being powered on. The
headphones will power off automatically after 8 minutes.
Paring with two phones simultaneously
1. Pair your headphones with the first phone and power-off your
headphones.
2. Press and hold the function button for over 4 seconds to power on your
headphones and enter Bluetooth pairing mode. Pair your
headphones with the second phone.
3. Enable Bluetooth in your first phone and pair it with the headphones.
When your headphones are paired with two phones simultaneously,
music can only be played on one phone at a time.
Reconnection after long distance disconnection
After the headphones disconnect from your paired phones:
If you return to Bluetooth range within 10 minutes, the
connection will automatically resume.
If you return to Bluetooth range within 30 minutes, the connection
can be manually reconnected.
If you do not return to Bluetooth range within 30 minutes, the
headphones will automatically power off.
Some phones cannot reconnect to the headphones automatically
due to differences in their Bluetooth technologies. Go to the
Bluetooth screen on your phone and manually connect your
headphones.
Handling calls
For an incoming call:
To answer the call, press the function button.
To reject a call, press and hold the function button for 2 to 4
seconds until you hear the prompt.
3
Advertisement
