Page 3
Preface This manual briefly explains the operations that need to be performed by the user in order to connect an ETERNUS DX/AF to a server running Solaris OS and using Fujitsu Fibre Channel cards via a Fibre Channel inter- face.
Page 4
A.1 WWN Instance Management Table for the Server ................ 25 A.2 WWN Instance Management Table for Storage System ..............25 A.3 Target Binding Table ........................26 FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED P3AM-3712-15ENZ0...
Chapter 1 Workflow This chapter describes the driver settings required to establish a connection between a server with Fujitsu Fibre Channel cards and an ETERNUS DX/AF. Workflow Installing the Fibre Channel Card Driver Install the driver. Download the proper driver from the Fujitsu web-site as required.
Page 6
After completing all the required procedures in this manual, proceed to "Setting the Multipaths" in "Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris". FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED...
Installing the Fibre Channel Card Driver Install the Fibre Channel card driver according to the installation guide provided with the Fibre Channel card. FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED...
Installing the hddv Driver Use the hddv driver if it is already installed and used. Do not use the hddv driver for new connections. FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED...
"Appendix A Various Management Table Templates" (page 25)). Physical slot name • • Instance name • Physical path name • FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED P3AM-3712-15ENZ0...
Page 10
"adapter=fjpfca#x" ("x" is instance number) is the format used to represent Fibre Channel card instant names. The WWN corresponding to the instance name is displayed after "wwn=". FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED...
Page 11
Check the blinking LEDs. To exit this command, press [Ctrl]+[C]. Alternatively, wait three minutes to exit automatically. FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED...
It is recommended to set the same target ID to CAs that configures a multipath. FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED P3AM-3712-15ENZ0...
Physical slots on Server#0 and CAs on the ETERNUS DX/AF storage systems are connected in the follow- ing paths. • Server#0 SLOT0 - CM0CA0 • Server#0 SLOT1 - CM1CA0 FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED P3AM-3712-15ENZ0...
Use the "chk_conf" command to check for errors. The settings in the configuration file can be checked for errors by entering the following command: #/usr/sbin/FJSVpfca/chk_conf -v FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED P3AM-3712-15ENZ0...
Page 15
*target definition* instance t-id status throt alias ------------------------------------------------------------------------------ fjpfca1 0x213100e000cb0001 detect UNDEF DX400_CM0CA0P0 fjpfca2 no binding none UNDEF DX400_CM1CA0P0 FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED P3AM-3712-15ENZ0...
Page 16
Is the target binding table recorded according to the information in the WWN instance management table? Is "fjpfca.conf" set up according to the information of the target binding table? • FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED P3AM-3712-15ENZ0...
Page 17
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED P3AM-3712-15ENZ0...
• Add the line to the "/kernel/drv/sd.conf" file. Do not delete the lun=0 description for the system disk target ID. FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED P3AM-3712-15ENZ0...
Reconfigure and reboot the server to get it to recognize the listed logical units. Execute the following command. # touch /reconfigure # /usr/sbin/shutdown -y -g0 -i6 FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED P3AM-3712-15ENZ0...
Page 20
3. c5t16d0 <FUJITSU-ETERNUS_DX400 cyl 1022 alt 2 hd 64 sec 256> /pci@9,600000/lpfc@2/sd@10,0 4. c5t16d1 <FUJITSU-ETERNUS_DX400 cyl 1022 alt 2 hd 64 sec 256> /pci@9,600000/lpfc@2/sd@10,1 Specify disk (enter its number): FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED P3AM-3712-15ENZ0...
When connecting with the server running on Solaris 10 OS in a single-path configuration, logical units do not need to be recognized with the hddv driver. FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED...
Binds the instance and the ETERNUS DX/AF storage systems' CA target port together. fcp-bind-target="<Instance name>t<SCSI target ID>:<alias name>" (<WWN> can be used instead of the <alias name>.) FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED P3AM-3712-15ENZ0...
Page 23
Channel Adapter name SCSI T-ID Alias name (WWN) Instance name fjpfca0 DX400_CM0CA0P0 CM0CA0Port0 fjpfca1 DX400_CM1CA0P0 CM1CA0Port0 fcp-bind-target="fjpfca0t0:DX400_CM0CA0P0","fjpfca1t0:DX400_CM1CA0P0"; FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED P3AM-3712-15ENZ0...
Physical path name WWN Instance Management Table for Storage System WWN instance management table for storage system Channel Adapter T_ID FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED P3AM-3712-15ENZ0...
Target Binding Table Target Binding Table Target binding table Server name: Channel Adapter name SCSI T_ID RAID-WWN Instance name Controller number FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris Copyright 2017 FUJITSU LIMITED P3AM-3712-15ENZ0...
Page 27
• operational problems as the result of errors, omissions, or the use of information in this manual. Fujitsu assumes no liability for damages to third party copyrights or other rights arising from the use of any information • in this manual.