HP 9000 Installation Manual page 13

D class and r class internal peripherals enterprise servers

Hide thumbs Also See for 9000:

D. Remove the Side

1. Loosen three captive side panel screws with a #15 Torx driver.

Panel

2. Grasp the front edge of the side panel and swing it away from the

3. Lift the side panel so that its four hinge tabs come out of the slots at

4. Carefully set the panel aside.

Chapter 1

system cabinet.

the rear of the cabinet.

D Class Internal Peripherals Installation

Installation Procedures

1- 7

Table of Contents