Table of Contents
Advertisement
Difficulties
The cordless handset beeps during
a call.
You cannot make an internal calls.
You cannot register the optional
cordless handset.
Error messages
As with any sophisticated office product, errors may occur. If this happens, your cordless handset
identifies the error and shows an error message. The most common error messages are shown
below.
You can correct most errors by yourself. If you need more help, the Brother Solutions Center offers
latest FAQs and troubleshooting tips.
Visit us at http://solutions.brother.com.
Error Message
Cause
Two people are speaking on the
Base Unit in
internal line.
Use
The machine (base unit) is being
set up for cordless handset
registration.
(Optional cordless handset only)
Cannot
register
You failed to register the cordless
Handset
handset.
The machine (base unit) is sending
Comm. Fax
or receiving a fax.
Line
The other cordless handset you
Handset in
called may be making an intercom
Use
call to another cordless handset.
Another person is on the phone line
Line in Use
using the machine's (base unit)
speaker phone or another cordless
handset.
The battery of the cordless handset
<Low battery>
is low.
Put Handset
on Cradle
You have not subscribed to the
No Caller ID
Caller ID service from your
telephone company.
Suggestions
Come closer to the machine (base unit). The cordless handset may be too far from
the machine (base unit).
Your battery may be low. If you want to continue the call, transfer the call to the
machine (base unit) and use the Speaker Phone key to answer. (See
Transferring a call at the end of a conversation on page 11.) And then, charge the
battery. (See Charging the battery on page 21.)
The cordless handset you want to call to may be on an internal call. Wait until the
line is free.
The other cordless handset may be on an internal call. Wait until the line is free.
Action
Wait until the line is free.
Wait until the registration is finished.
Try to register the cordless handset. (See
Registering additional cordless
handsets on page 3.)
Wait until the line is free.
Wait until the line is free.
Wait until the line is free.
Charge the battery. (See Charging the
battery on page 21.)
If you want to use the Caller ID feature call your
telephone company. (See Caller ID in the User's
Guide.)
Troubleshooting and Routine Maintenance
4
4
20
Advertisement
Table of Contents
