Basic Operation; Loading The Sd Memory Card; Removing The Sd Memory Card From This Unit - Pioneer HD-V9000 Operating Instructions Manual

Chapter 5

Basic Operation

Loading the SD
memory card
Caution
• If the SD memory card is inserted or removed while
this unit's power is still on, it may not play properly. If
this happens, turn the power off then back on to
reload the SD memory card's information.
STANDBY/ON
SEARCH REPEAT MEMORY RECALL
FRM
/TIME
NAVI-
GATOR
SETUP
1 Set the groove in the door lock key on the main
unit's front panel so that it is vertical.
The door is unlocked and can now open.
Unlocked
2 Open the door and load the SD memory card.
Hold the SD memory card with the front facing upwards
and insert it slowly all the way into the slot until it stops.
3 Close the door and set the groove in the door lock
key so that it is horizontal.
The door is locked and no longer opens.
OUTPUT
RESOLUTION
+
-
DISPLAY
PLAY
MODE
RETURN
Groove is
vertical
Locked
4 Turn on the power.
Press the STANDBY/ON button.
Playback is possible once the POWER ON message
appears. About one minute is required before playback
becomes possible. Take this startup time into account
when controlling the power externally.
Note
• See page 22 for the folder structure of SD memory
cards used on this unit.
Removing the SD memory
card from this unit
Caution
• Do not pull the SD memory card out or unplug this
unit's power cord while the CARD ACCESS indicator
is flashing. Doing so could destroy the data recorded
on the card.
1 Turn off the power.
Press the STANDBY/ON button. After the POWER OFF
message appears, the display turns off and the
STANDBY/ON button's indicator switches from green
to orange.
2 Set the groove in the door lock key so that it is
vertical.
The door is unlocked and can now open.
3 Open the door, push the SD memory card in so
that it pops out a little, then pull it out horizontally.
• Do not forcibly insert or pull out the SD memory card.
Doing so could damage the SD memory card or lead
to malfunction of this unit.
• Do not insert any objects other than SD memory
cards into the SD memory card insertion slot.
Inserting coins or other metal objects could damage
the internal circuitry and lead to malfunction.
• If the SD memory card is inserted or removed while
this unit's power is still on, it may not play properly. If
this happens, turn the power off then back on to
reload the SD memory card's information.
Groove is
horizontal
05
37
En