Doorphones And Door Lock Relay Contacts - NEC SL2100 Quick Install Manual

Configure the SL2100

Doorphones and Door Lock Relay Contacts

You can connect an NEC Doorphone unit to either analogue extension ports of the IP7WW-082U-B1 card (these
ports can be either analogue telephone, Doorphone or External sensor.
The port is setup by hardware switched on the IP7WW-082U-B1 card, refer to the Quick Install Guide for MOH
and External Audio for details.
Go to the Chassis View to check the port assignment.
Doorphone
Then click on the port you've assigned
to show the Properties pane for doorphones, you can then name
the doorphone and assign the phones that will ring in each mode.
Quick Install Guide – SL2100 Terminals Type B rev 1.0
25