Dmp Compact Module 1E Nc Analog 6Fc5211-0Aa10-0Aa0 - Siemens SINUMERIK 840DE User Manual

7 DMP Compact Modules
7.5 DMP compact module 1E NC analog
7.5 DMP compact module 1E NC analog
6FC5211-0AA10-0AA0
The DMP compact module 1E NC analog is an encapsulated high-speed ana-
log input module with 75ms access time. It can be plugged into a slot of the NCU
terminal block as a plug-in module.
The DMP compact module 1E NC analog serves for inputting and digitizing an
analog voltage value. This voltage value is measured by an isolated differential
input.
Fig. 7-6
S
Interfaces
S
S
Display elements
1 LED as a status display for the power supply.
LED lit:
Analog-value
The converter result is available to the user as two's complement. The resolu-
representation tion is 4.88 mV for one bit. The duration for a converter cycle (from triggering of
conversion to the time at which the result can be read out) is max. 75 µs.
7-86
Status
POWER
SUPPLY
LED
O.K.
Labeling
strips
ANALOG
IN
Fastening
screw
Front view and side view of a DMP compact module 1E NC analog
A 30-pole connector X1 for connection to the NCU terminal block.
4x terminal X3 (Phoenix, Type MSTB2.5/4-ST-5.08 GREY, Order No. for X3:
18 48 407) for connecting the power supply for the analog part and 6x termi-
nal X2 (Phoenix, Type MSTB2.5/6-ST-5.08 GREY, Order No. for X2: 17 87
076) for connecting the analog input.
The terminals are pluggable and can be mechanically coded by the custo-
mer.
internal power supply OK.
SINUMERIK 840D Configuring Manual NCU (PHD) – 03.06 Edition
M1 M2
P1 P2
2.5
24 V DC
0 V
X3 Connection terminals
X1
1 1
3 2 2
6 . . 1
X2
Terminal:
6, 1 Shield
2
2.5
3
4
5
© Siemens AG, 2006. All rights reserved
03.06
Ground
Analog input In+
Analog input In–
Ground